1. Trang chủ
  2. Kỹ Thuật - Công Nghệ

ASME BPVCode x 2015 fiber reinforced plastic pressure vessels

290 1.2K 0
ASME BPVCode x 2015 fiber reinforced plastic pressure vessels

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

Thông tin tài liệu

Ngày đăng: 21/02/2017, 19:58

Xem thêm: ASME BPVCode x 2015 fiber reinforced plastic pressure vessels , ASME BPVCode x 2015 fiber reinforced plastic pressure vessels , 4 Creep, Stress-Rupture, and Temperature Effects, RD-1001 Requirements for Vessels 12 in. (300 mm) in Diameter and Smaller, AF-500 Head‐to‐Shell Joint Overlay Subject to Internal Pressure (see RD-1175.2), RD-620.4(b) Typical Cone‐Type Gusset, RD-1175.2 Head/Shell or Shell/Shell Overlay Dimensions, RD-1176.5 Values of T, Z, Y, and U, RF-210.1 Fiber Side Wall Lay‐up for Bag Molding, RD-620.1 Flange and Nozzle Dimensions for Hand Lay‐Up and Pressure Molded Flanges

Từ khóa liên quan

Mục lục

  • Table of Contents

  • List of Sections

    • INTERPRETATIONS

    • CODE CASES

    • Foreword

    • Statement of Policy on the Use of the Certification Mark and Code Authorization in Advertising

    • Statement of Policy on the Use of ASME Marking to Identify Manufactured Items

    • Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees

      • 1 Introduction

      • 2 Inquiry Format

      • 3 Code Revisions or Additions

      • 4 Code Cases

      • 5 Code Interpretations

      • 6 Submittals

      • Personnel

      • Introduction

        • 1 General

        • 2 Materials

        • 3 Design

          • 3.1 General

          • 3.2 Low Modulus Characteristics

          • 3.3 Fatigue

          • 3.4 Creep, Stress-Rupture, and Temperature Effects

          • 3.5 Fabrication

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan