Đang tải... (xem toàn văn)
Ngày đăng: 21/02/2017, 19:58
Xem thêm: ASME BPVCode VIII 2015 d3 alternative rules for construction of high pressure vessels , ASME BPVCode VIII 2015 d3 alternative rules for construction of high pressure vessels , KD-320.2M Design Fatigue Curve Sa = f(Nf) for Nonwelded Parts Made of Carbon or Low Alloy Steels for Temperatures Not Exceeding 371°C and UTS Less Than 620 MPa, KD-320.6M(b) Roughness Factor Kr Versus Maximum Surface Roughness Rmax Micrometer, KD-830.5 Some Acceptable Welded Joints of Layered‐to‐Layered and Layered‐to‐Solid Sections, KF-825.4(b) Angled Radiographic Technique for Detecting Layer Wash, L-110.1 Stress Classification Line (SCL) and Stress Classification Plane (SCP), KM-234.2(b) Minimum Required Charpy V‐Notch Impact Values for Bolting Materials, KE-301-2 Flaw Acceptance Criteria for Larger Than 12 in. (300 mm) Thick Weld, A-100.3 Supplementary Instructions for the Preparation of Manufacturer’s Certificate of Conformance Form K-5, A-100.4 Instructions for the Preparation of Manufacturer's Data Reports Form CRPV-1A