B31.8 2014 Gas Transmission and Distribution Piping Systems

224 4.2K 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

/ 224 trang

Thông tin tài liệu

B31.8 2014 Gas Transmission and Distribution Piping Systems This Code covers the design, fabrication, installation, inspection, and testing of pipeline facilities used for the transportation of gas. This Code also covers safety aspects of the operation and maintenance of those facilities.

Ngày đăng: 21/02/2017, 19:29

Xem thêm: B31.8 2014 Gas Transmission and Distribution Piping Systems, B31.8 2014 Gas Transmission and Distribution Piping Systems, 6 Meters, Regulators, and Pressure Relief Stations, 2 Steel, Cast Iron, and Ductile Iron Piping Components, 3 Inspection and Tests for Quality Control of Welds on Piping Systems Intended to Operate at Hoop Stress Levels of 20% or More of the Specified Minimum Yield Strength, 3 Materials, Design, and Installation, 1 General Provisions Applicable to Steel, Copper, and Plastic Service Lines, 4 Requirements for Abandoning, Disconnecting, and Reinstating Distribution Facilities, 2 Uprating Steel Pipelines or Mains to a Pressure That Will Produce a Hoop Stress of 30% or More of SMYS, B823.2 Requirements for Qualification of Procedures and Welders on Sour Gas Piping Systems

Từ khóa liên quan

Mục lục

CONTENTS
FOREWORD
ASME B31 COMMITTEE ROSTER
INTRODUCTION
ASME B31.8-2014 SUMMARY OF CHANGES
General Provisions and Definitions
- 801 GENERAL
  - 801.1 Approved Standards and Specifications
  - 801.2 Use of Standards and Specifications Incorporated by Reference
  - 801.3 Standard Dimensions
  - 801.4 SI Metric Conversion
  - 802 SCOPE AND INTENT
    - 802.1 Scope
    - 802.2 Intent
      - 802.2.1 Adequacy for Normal Conditions.
      - 802.2.2 Safety.
      - 802.2.3 Retroactive Applications.
      - 802.2.4 Application to Existing Facilities.
      - 802.2.5 Qualification of Those Performing Inspections.
      - 802.2.6 Further Information.
      - 802.3 Offshore Gas Transmission
      - 803 PIPING SYSTEMS DEFINITIONS
        803.1 General Terms and Definitions
        803.2 Piping Systems
        803.3 Distribution Systems

Tài liệu cùng người dùng

B31.5 2016 Refrigeration Piping and Heat Transfer Components B31.5 2016 Refrigeration Piping and Heat Transfer Components
102 1.814 0
ASME 31.12 2008 Hidrogen Piping and Pipelines ASME 31.12 2008 Hidrogen Piping and Pipelines
258 297 0
B31.1 2016 Power Piping B31.1 2016 Power Piping
366 2.212 0
B31.4 2016 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids B31.4 2016 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids
138 1.601 0
B31.8S 2012 Managing System Integrity of Gas Pipelines B31.8S 2012 Managing System Integrity of Gas Pipelines
80 521 0
ASME BPVCode 2015 code cases boilers and pressure vessels ASME BPVCode 2015 code cases boilers and pressure vessels
1.090 218 0

Tài liệu liên quan

Automating quality systems a guide to the design and implementation of automated quality systems in manufacturing ( TQL) Automating quality systems a guide to the design and implementation of automated quality systems in manufacturing ( TQL)
242 58 0
Báo cáo khoa học: The structural comparison of the bacterial PepX and human DPP-IV reveals sites for the design of inhibitors of PepX activity pot Báo cáo khoa học: The structural comparison of the bacterial PepX and human DPP-IV reveals sites for the design of inhibitors of PepX activity pot
10 561 0
Development and implementation of efficient segmentation algorithm for the design of antennas and arrays Development and implementation of efficient segmentation algorithm for the design of antennas and arrays
220 332 0
Financial reporting comparability and accounting based relative performance evaluation in the design of CEO cash compensation contracts Financial reporting comparability and accounting based relative performance evaluation in the design of CEO cash compensation contracts
29 8 0
Báo cáo sinh học: " Review of the temporal and geographical distribution of measles virus genotypes in the prevaccine and postvaccine eras" pdf Báo cáo sinh học: " Review of the temporal and geographical distribution of measles virus genotypes in the prevaccine and postvaccine eras" pdf
9 477 0
báo cáo hóa học:" Review of the temporal and geographical distribution of measles virus genotypes in the prevaccine and postvaccine eras" potx báo cáo hóa học:" Review of the temporal and geographical distribution of measles virus genotypes in the prevaccine and postvaccine eras" potx
9 395 0
Geology of Late Miocene clayey sediments and distribution of palaeosol clay minerals in the north-eastern part of the Cappadocian Volcanic Province (Araplı-Erdemli), central Anatolia, Geology of Late Miocene clayey sediments and distribution of palaeosol clay minerals in the north-eastern part of the Cappadocian Volcanic Province (Araplı-Erdemli), central Anatolia,
17 52 0
Seawater Purification Experiment and Consideration about Photoreactivation of Coliforms in the Inside of Seawater Seawater Purification Experiment and Consideration about Photoreactivation of Coliforms in the Inside of Seawater
8 388 0

B31.8 2014 Gas Transmission and Distribution Piping Systems

Thông tin tài liệu

Từ khóa liên quan

Mục lục

CONTENTS

FOREWORD

ASME B31 COMMITTEE ROSTER

INTRODUCTION

ASME B31.8-2014 SUMMARY OF CHANGES

General Provisions and Definitions

801 GENERAL

801.1 Approved Standards and Specifications

801.2 Use of Standards and Specifications Incorporated by Reference

801.3 Standard Dimensions

801.4 SI Metric Conversion

802 SCOPE AND INTENT

802.1 Scope

802.2 Intent

802.2.1 Adequacy for Normal Conditions.

802.2.2 Safety.

802.2.3 Retroactive Applications.

802.2.4 Application to Existing Facilities.

802.2.5 Qualification of Those Performing Inspections.

802.2.6 Further Information.

802.3 Offshore Gas Transmission

803 PIPING SYSTEMS DEFINITIONS

803.1 General Terms and Definitions

803.2 Piping Systems

803.3 Distribution Systems

Tài liệu cùng người dùng

Tài liệu liên quan