Đang tải... (xem toàn văn)
Automotive Mechanics (Volume I)(Part 1, chapter3) Tools and their use Tools and their use 33 Tools for turning 34 Tools for holding and gripping 38 Tools for hammering and driving 39 Tools for cutting and forming 41 Tools for drilling and reaming 44 Tools for threading 46 Tools and materials for grinding and abrading 48 Tools for pulling and pushing 51 Special service tools 51 Technical terms 51 Review questions 51
... chapter three tools and their use Ring and open-end spanners are a combination, with a ring at one end and open jaws at the other The ring end can be used for loosening a bolt or nut and for final... of a hand lever Tools for threading In the workshop, threads are cut by taps and dies A set of tools consists of a stock and dies and also a tap wrench and taps (Figure 3.42) Taps Taps are used... shown in Figure 3.22 Tools for hammering and driving These include hammers, and tools such as punches and chisels that are used with hammers Hammers figure 3.20 Types of pliers and tongs (a) Multigrip