216 Linear Momentum, Collisions, and Center of Mass (24) A ball of mass m1 = 0.5 kg, moving along the x-axis with a speed of m/s, has an elastic head-on collision with a target ball of mass m2 = kg initially at rest What is the velocity of each ball after the collision? (25) A ball of mass m1 and velocity v1 undergoes an elastic head-on collision with a second ball of mass m2 initially at rest Then m1 rebounds with a speed v1 = −0.5v1 Find the value of m2 in terms of m1 (26) A croquet ball of mass m1 = kg and velocity v1 undergoes an elastic head-on collision with a second ball of mass m2 that is initially at rest Then m1 moves with a velocity v1 and m2 moves with a velocity v2 = (4/5)v1 (a) Find the value of m2 (b) Find the relation between v1 and v1 (c) What fraction of the original kinetic energy goes to the second ball? (27) Find the fraction of kinetic energy lost by a neutron of mass m1 = 1.01u when it undergoes an elastic head-on collision with a stationary nucleus of: (a) a hydrogen atom (11 H) of mass m2 = 1.01 u, (b) a heavy hydrogen atom (21 H) of mass m2 = 2.01 u, (c) a carbon (12 C) atom of mass m2 = 12.00 u, and (d) a lead atom (208 82 Pb) of mass m2 = 208 u (28) A block of mass m1 = kg slides along a frictionless horizontal surface with a speed v1 = m/s toward a stationary second block of mass m2 = 0.5 kg The second block is connected to an elastic spring that is not stretched and has a spring constant kH = 100 N/m The other end of that spring is fixed to a wall, see Fig 7.35 (a) Is the collision elastic? Explain your answer (b) What will be the maximum compression of the spring? Fig 7.35 See Exercise (28) (29) A block of mass m1 = 2.5 kg slides along a frictionless horizontal surface with a speed v1 = m/s toward a stationary second block of mass m2 = 7.5 kg A massless spring with spring constant kH = 1,920 N/m is attached to the near 7.7 Exercises 217 side of m2 , as shown in Fig 7.36 (a) Is the collision elastic? Explain (b) What is the speed of the mass-spring system at the maximum compression? (c) What will be the maximum compression of the spring? (d) What will be the final velocities of the two blocks? 2=0 m1 m2 Before collision mass-spring system At maximum compression m2 m1 ′ ′ m2 m1 After collision Fig 7.36 See Exercise (29) (30) Repeat Exercise (29), this time with m1 = 7.5 kg and m2 = 2.5 kg (31) Show that the fraction of kinetic energy transferred to the target in Example 7.5 is independent of the value of the speed of the projectile, v1 Then, redo this example when m2 = 3m1 (32) A hockey puck traveling at 30 m/s on a smooth ice surface is deflected by θ1 = 30◦ from its original direction when it collides elastically with a second stationary identical puck The second puck acquires a velocity at θ2 = 60◦ from the original velocity of the first puck, see Fig 7.37 Find the speed of the pucks after the collision Before collision y 2= x At rest Hockey pucks Fig 7.37 See Exercise (32) ′ y θ1 After collision x θ2 ′ 218 Linear Momentum, Collisions, and Center of Mass (33) If each angle in Exercise (32) is equal to 45◦ , then show that only the application of conservation of momentum is enough to find the speed of the pucks after the collision Also, show that any other two equal angles (say 30◦ ) are physically unacceptable (34) A ball of momentum → p collides with an identical stationary ball The first ball deflects by an angle θ1 from its original direction with a momentum → p while the second ball deflects by an angle θ2 from the original direction of the first ball with a momentum → p If the two balls have an elastic collision, then use the conservation of momentum vector diagram of Fig 7.38 and conservation of kinetic energy to show that the two balls will always move off perpendicular to each other, i.e θ1 + θ2 = 90◦ y Before p1 m p 1′ y θ1 m p2 = x θ1 m p 1′ After x θ2 m At rest p 2′ θ2 p 2′ θ1 p1 Fig 7.38 See Exercise (34) Subsection 7.3.2 Inelastic Collisions (35) In a ballistic experiment like the one shown in Example 7.6, a bullet causes the pendulum to rise to a maximum height h1 = 1.3 cm A second bullet of the same mass causes the pendulum to rise to a maximum height h2 = 5.2 cm Express the speed of the second bullet as a multiple of the first bullet (36) Find a formula that gives the fractional change of kinetic energy, (Kf − Ki )/Ki , in terms of m and M in the first stage of the ballistic pendulum of Example 7.6 Calculate this fraction for m = 10 g and M = 0.5 kg (37) A 15-kg mass is moving along the positive x-axis at 30 m/s, and a 5-kg mass is moving along the negative x-axis at 50 m/s The two masses collide head-on and stick together (a) Find their velocity after the collision (b) Find the fractional change of kinetic energy (38) A car of mass m1 = 1,000 kg moving with a speed v1 collides with another stationary car of mass m2 = 2,200 kg The two cars stick together after the 7.7 Exercises 219 collision Both drivers had their brakes locked throughout the incident, see Fig 7.39 The police officer measures the skidding distance d to be 2.25 m and estimated the coefficient of kinetic friction between the tires and the road to be 0.8 (a) What was the speed of the oncoming car? (b) Find the fractional change of kinetic energy lost during the impact period At rest m1 m2 v1 v Before collision Just after collision At rest d Fig 7.39 See Exercise (38) (39) A nucleus at rest spontaneously disintegrates into two nuclei, one of which has double the mass of the other Assume that the total mass is conserved before and after disintegration (a) Find the relation between the speeds of the two fragments (b) If × 10−17 J of energy is released in this disintegration, how much kinetic energy does each nucleus acquire? (40) Two objects having the same mass m = kg collide Their velocities before → → → → collision are v→1 = (3 i +6 j )(m/s) and v→2 = (−2 i +1 j )(m/s) After collision, → → the first object acquires a velocity v→1 = (−1 i + j )(m/s) (a) What is the final velocity of the second object? (b) How much kinetic energy is lost or gained in this collision? (41) A stationary radioactive nucleus decays into three fragments Two of these fragments are emitted perpendicularly to each other and have momenta |→ p | = × 10−23 kg.m/s and |→ p | = 1.2 × 10−22 kg.m/s Find the magnitude and direction of the third fragment (42) A ball of mass m1 = 2.4 kg moving horizontally with a speed of v1 = m/s collides (not head-on) with a second ball of m2 = 1.5 kg moving in the opposite direction with a speed v2 = m/s, see Fig 7.40 The first ball bounces off the second ball with an angle θ1 = 60◦ and speed v = 1.5 m/s (a) What is the 220 Linear Momentum, Collisions, and Center of Mass final velocity of the second ball? (b) How much kinetic energy is lost in this collision? m2 After collision Before collision '2 m2 θ m1 60° ' 1 m1 Fig 7.40 See Exercise (42) (43) Two identical putty balls move along a frictionless floor, as shown in Fig 7.41 Their velocity vectors v→1 and v→2 make an angle θ and move with the same speed, i.e v1 = v2 The two balls stick together after collision (a) Use the momentum vector diagram shown in the figure to prove that the magnitude v and the direction φ of their common velocity v→ are given by: √ √ v = 21 v1 + cos θ , φ = sin−1 sin θ/ + cos θ (b) Taking v1 = v2 = 20 m/s and θ = 45◦ to calculate v, φ, and the fractional change in the kinetic energy y y Before m After x θ m y φ θ m p p1 m x φ θ p2 θ x Fig 7.41 See Exercise (43) Section 7.4 Center of Mass (CM) 12 (44) An oxygen atom (16 O) has a mass mO = 16 u, and a carbon atom (6 C) has a mass mC = 12 u The average distance between their nuclei in the CO molecule 7.7 Exercises 221 is d = 0.113 nm, see Fig 7.42 How far from the oxygen nucleus is the center of mass of the molecule? Fig 7.42 See Exercise (44) y d C O x CM (45) For the system of particles shown in Fig 7.43 and when d = m, find the location of the x and y components of the center of mass Does your answer depend on the value of m? Explain Fig 7.43 See Exercise (45) y y=d 4m m 2m 3m x x = −d x=0 x = +d (46) Three particles, each of mass m, are located at the corners of an equilateral triangle of side a, as shown in the Fig 7.44 Show that the center of mass of the system lies on a common point on the three lines that connect each vertex with the midpoint of the opposite side (the medians) Fig 7.44 See Exercise (46) y m ( x =a / 2, y =a / ) a a CM m x=0 m a x= a x 222 Linear Momentum, Collisions, and Center of Mass (47) In an ammonia molecule (NH3 ), the three hydrogen (11 H) atoms are at the corners of an equilateral triangle of side a = 0.16 nm that forms the base of a pyramid, with nitrogen atom (14 N) at the apex above the center of this triangle by h = 0.037 nm, see Fig 7.45 Find the distance of the center of mass of the ammonia molecule above the plane of the hydrogen atoms Fig 7.45 See Exercise (47) N H H a a h a H (48) A mass m1 = kg is connected to a mass m2 = kg by a massless rod The → → location of m1 and m2 are given by the position vectors → r = (4 i + j )(m) → → and → r = (2 i + j )(m), respectively Find the coordinates of the center of mass (49) Three uniform thin rods, each of length L, are arranged to form the shape shown in Fig 7.46 The vertical arms have mass M and the horizontal arm has a mass 2M Find the center of mass of the assembly Fig 7.46 See Exercise (49) L 2M L M M (50) Find the center of mass of a uniform cone of radius R and height h, see Fig 7.47 (Hint: Divide the cone into an infinite number of disks, each of thickness dx.) (51) A pyramid has a height H and square base area of side L, see Fig 7.48 Find the center of mass of the pyramid above its base Calculate zCM for the Great 7.7 Exercises 223 Pyramid of Khufu at Giza, Egypt, which has height H = 138.8 m and base square area of side L = 230.4 m (Hint: Divide the pyramid into an infinite number of squares, each of height dz.) y Fig 7.47 See Exercise (50) h R x z Fig 7.48 See Exercise (51) z H y L x L Section 7.5 Dynamics of the Center of Mass (52) The velocities of two particles of masses m1 = kg and m2 = kg are given → → → → by the position vectors v→1 = (4 i + j )(m/s) and v→2 = (2 i − j )(m/s), respectively Find the velocity of the center of mass of that system → (53) A ball of mass m1 = kg traveling with velocity v→1 = 15 i m/s collides headon and elastically with a second ball of mass m1 = kg traveling with velocity → → v = −4 i m/s, see Fig 7.49 (a) Find the velocities of the two balls after the collision (b) Find the velocity of the center of mass before and after the collision Fig 7.49 See Exercise (53) m1 × CM m2 224 Linear Momentum, Collisions, and Center of Mass (54) Two particles of masses m1 = 0.2 kg and m1 = 0.3 kg are initially at rest m apart The two particles form an isolated system Each particle starts to attract the other with an equal internal constant force of magnitude 0.12 N (a) What is the speed of their center of mass before and after the start of the attractive force? (b) What distance does m1 move before colliding with m2 ? (c) What will be the speed of m1 and m2 just before the collision? (55) A man of mass m = 70 kg stands on one end of a flat boat, which is always moving horizontally without friction at a speed of v◦ = m/s over water The boat has a mass M = 210 kg and length L = 20 m, see Fig 7.50 The man starts to walk to the other end in the direction of the boat’s motion with a relative speed vrel = m/s (a) What is the location and velocity of the center of mass before and after the motion of the man? (b) What is the velocity vB of the boat once the man starts to move? (c) What time does the man take to reach the other end, and how far has the boat moved? L × ° CM = CM M t=0 × B CM x CM M × Time t CM t CM B x CM Fig 7.50 See Exercise (55) (56) A projectile is fired from the ground with an initial speed v◦ of 40 m/s at an angle θ◦ of 15◦ m/s above the horizontal direction At the maximum height, the projectile explodes into two fragments of equal mass, see Fig 7.51 One fragment stops momentarily and falls vertically, while the second one flies 7.7 Exercises 225 initially in a horizontal direction How far from the ground the center of mass and the second fragment land? Take g = 10 m/s2 Fig 7.51 See Exercise (56) y Path of CM ° θ° x R Section 7.6 Systems of Variable Mass (57) A stationary grain funnel drops grain at a rate dM/dt = 840 kg/min onto a railroad car moving with a constant speed v = 3.5 m/s, see Fig 7.52 (a) What external force must be applied to the car to keep it moving at constant speed (in the absence of friction)? (b) Find the power delivered by this force (c) Find the rate of the kinetic energy acquired by the falling grains Fig 7.52 See Exercise (57) Grains Fext (58) During the first second of its flight in free space, a rocket ejects exhaust that is 1/50 of its mass with a relative speed vrel = 2.5 × 103 m/s What is the acceleration of the rocket? (59) A rocket of mass M = 3,000 kg ejects fuel and oxidizer at a rate of 150 kg/s in order to acquire an acceleration a = 4g What is the relative speed of the exhaust and the thrust on the rocket? (60) A rocket of mass M = 3,000 kg is moving in free space with a speed v = × 102 m/s relative to the Earth The rocket ejects fuel at a rate of 15 kg/s with a relative speed of 2.5 × 103 m/s (a) Find the thrust on the rocket (b) Find the final speed of the rocket when its fuel burns completely after 20 s 8 Rotational Motion In this chapter, we first treat the rotation of an extended object about a fixed axis This is commonly known as pure rotational motion The analysis is greatly simplified when the object is rigid To perform this analysis, we first ignore the cause of rotation and describe the rotational motion in terms of angular variables and time This is known as rotational kinematics We then discuss the causes of rotation This is known as rotational dynamics, and through the study of this topic we introduce the concept of torque After that we treat some general cases where the axis of rotation is not fixed in space In these cases, rigid bodies can undergo both rotational and translational motion, as in the rolling of objects 8.1 Radian Measures One radian (1 rad) is the angle subtended at the center of a circle of radius r by an arc of length s equal to the radius of the circle, i.e s = r, see Fig 8.1a Since the circumference of a circle of radius r is s = 2π r, where π 3.14, then 360◦ (or one revolution) corresponds to an angle of (2π r)/r = 2π rad, see also Appendix B Thus: rev = 360◦ = 2π rad ⇒ 180◦ = π rad (8.1) Therefore: 1◦ = (π/180) rad ◦ rad = 180 /π 0.02 rad 57.3◦ H A Radi and J O Rasmussen, Principles of Physics, Undergraduate Lecture Notes in Physics, DOI: 10.1007/978-3-642-23026-4_8, © Springer-Verlag Berlin Heidelberg 2013 227 228 Rotational Motion s=r Fig 8.1 (a) The definition of one radian (1 rad) (b) The definition of angle θ as the 1rad r r r ratio of the arc length s to the θ r s radius r (a) (b) Generally, if θ (in radians) represents any arbitrary angle subtended by an arc of length s on the circumference of a circle of radius r, see Fig 8.1b, then the following relation must be satisfied: θ= 8.2 s (Radian measure) r (8.2) Rotational Kinematics; Angular Quantities Angular Position The rotational motion of a rigid body (or a particle) about an axis is completely specified by an angle θ that a fixed line in the rigid body (or the particle) makes with some reference fixed line in the space, usually chosen as the x-axis Additionally, the rotational motion is greatly simplified if θ is expressed in radians This angle θ is defined as the angular position of the rigid body (or the particle) Figure 8.2 represents a rigid body that is rotating about a fixed axis passing through point O, where that axis is perpendicular to the plane of the figure Line OP is fixed in the body and completely specified at time t by the angular position θ which the line OP makes with respect to the x-axis Therefore, the angular position of the rigid body, or the particle at point P which has polar coordinates (r, θ ), is: Angular position = θ (8.3) Angular Displacement When the rigid body rotates as shown in Fig 8.3, the angular position of the line OP changes from θ1 at time t1 to θ2 at a later time t2 The quantity θ = θ2 − θ1 is defined as the angular displacement of the a rigid body: 8.2 Rotational Kinematics; Angular Quantities 229 Angular displacement ≡ θ = θ2 − θ1 (8.4) Fig 8.2 The definition of the angular position θ of a rigid P body, or a particle at point P with polar coordinates (r, θ ), Time t r with respect to the x-axis θ x O Fig 8.3 The angular θ = θ2 − θ1 of a rigid body that occurs during displacement the time interval P t2 t = t2 − t1 r P t r x O Angular velocity In analogy to the average linear (translational) speed, we define the average angular speed ω as the rate of change of angular displacement (ω is the lowercase Greek letter omega) That is: ω= θ θ2 − θ = t t2 − t (8.5) The instantaneous angular velocity ω is defined as the limiting value of the ratio θ/ t when t approaches zero Thus: ω = lim t→0 dθ θ = t dt tf ≡ θf − θi = ω dt ti (8.6) 230 Rotational Motion In SI units the angular velocity has the unit of radians per second (rad/s) and can be written as second−1 (s−1 ) because radians are not dimensional quantities The last two equations hold for every point on the rigid body That is, all points of the rigid body rotate through the same angular displacement in the same time As in linear motion in one-dimension (where the linear velocity can be positive or negative), we take ω to be positive if θ increases (in a counterclockwise sense) and ω to be negative if θ decreases (in a clockwise sense) Angular Acceleration When the angular velocity of the rotating body is not constant, the body has an angular acceleration Assume that ω1 and ω2 are the angular velocities at times t1 and t2 , respectively, as shown in Fig 8.4 Then we define the average angular acceleration α (Greek alpha “α”) as the rate of change of angular velocity as follows: α= ω ω2 − ω1 = t t2 − t (8.7) Fig 8.4 The change in the angular velocity ω = ω2 − ω1 of a rigid body which occurs during the time interval P t P r t = t2 − t1 t1 r x O Therefore, the instantaneous angular acceleration α is defined as the limiting value of the ratio ω/ t when α = lim t→0 t approaches zero Thus: ω dω = t dt tf ≡ ωf − ωi = α dt ti (8.8) 8.2 Rotational Kinematics; Angular Quantities 231 Angular acceleration has the unit of radians per second square (rad/s2 ) and can be written as second−2 (s−2 ) Example 8.1 A reference line in a spinning disk has an angular position given by θ = t − 12 t + 9, where θ is in radians and t is in seconds (a) Find ω and α as a function of time (b) Find the times when the angular position θ and the angular velocity ω become zero (c) Describe the rotational motion of the disk for t ≥ Solution: (a) To find ω, we differentiate θ with respect to time: ω= dθ d = (3 t − 12 t + 9) = (6 t − 12) rad/s dt dt Thus, ω could be negative or positive depending on t To find the angular acceleration α, we differentiate ω with respect to time: α= dω d = (6 t − 12) = rad/s2 dt dt (b) Setting θ = 0, we get: t − 12 t + = ⇒ t= 12 ± √ 122 − × × 2×3 ⇒ t = s and t = s Thus, θ reaches zero at both t = s and t = s Setting ω = gives: t − 12 = ⇒ t = s (when ω = 0) (c) We can describe the rotation as follows: • At t = the reference line is at θ = rad and the disk’s initial angular velocity is ω = −12 rad/s • As time increases during the interval < t < s, we have ω < That is, the disk is rotating in the clockwise sense, but with a decreasing angular speed, since α > In addition, θ reaches the value θ = at t = s, and then attains negative values • At t = s, the disk stops momentarily when θ = −3 rad • As time increases during the interval t > s, we have ω > In addition, θ goes back to zero again when t = s Afterward, both ω and θ will increase indefinitely 232 Rotational Motion 8.3 Constant Angular Acceleration The definitions of angular quantities are similar to those of linear quantities, except that θ, ω, and α replace the linear variables x, v, and a, respectively Therefore, the angular equations for constant angular acceleration will be analogous to those presented in Chap and can be derived in exactly the same way, see Table 3.1 Table 8.1 summarizes the angular kinematic equations and their linear equivalents Table 8.1 Equations for Linear equations motion with constant linear and angular accelerations v = v◦ + a t x − x◦ = 21 (v◦ + v) t x − x◦ = v◦ t + 21 a t v = v◦2 + a (x − x◦ ) Angular equations x⇔θ v⇔ω a⇔α ω = ω◦ + α t θ − θ◦ = 21 (ω◦ + ω) t θ − θ◦ = ω◦ t + 21 α t ω2 = ω◦2 + α (θ − θ◦ ) Example 8.2 A wheel accelerates uniformly from rest to an angular speed of 25 rad/s in 10 s (a) Find the angular acceleration of the wheel (b) Find the tangential and radial acceleration of a point 10 cm from the wheel’s center (c) How many revolutions has the wheel turned during this time interval? (d) Then, find the wheel’s angular deceleration if it comes to a full stop after rev Solution: (a) We are given ω◦ = 0, ω = 25 rad/s, and t = 10 s To find the angular acceleration a, we can use ω = ω◦ + α t as follows: α= ω − ω◦ 25 rad/s − = = 2.5 rad/s2 t 10 s (b) Using Eqs 8.13 and 8.14 (See Sect 8.5), we get: at = r α = (10 × 10−2 m)(2.5 rad/s2 ) = 0.25 m/s2 ar = r ω2 = (10 × 10−2 m)(25 rad/s)2 = 62.5 m/s2 (c) If we assume that the wheel starts from θ◦ = 0, then we are given ω◦ = 0, ω = 25 rad/s, θ◦ = 0, and t = 10 s To find θ, which in this case equals the angle traveled by a certain reference line in the wheel, we use θ − θ◦ = (ω◦ + ω) t as follows: 8.3 Constant Angular Acceleration 233 θ = θ◦ + 21 (ω◦ + ω) t = + 21 (0 + 25 rad/s) × 10 s = 125 rad θ = 125 rad × Thus: rev 2π rad 20 rev (d) We are given ω◦ = 25 rad/s, ω = 0, and, θ − θ◦ = rev = 10π rad To find the angular deceleration α, we use ω2 = ω◦2 + α (θ − θ◦ ) to get: α= 8.4 ω2 − ω◦2 − (25 rad/s)2 = = −9.95 rad/s2 (θ − θ◦ ) × 10π rad Angular Vectors We can treat angular velocity as a vector by choosing the axis of rotation to be the direction of the angular-velocity vector By convention, the right-hand rule is used → To apply this rule, we curl the four fingers of the right hand around to determine ω the rotation axis and point in the direction of rotation; then the thumb would point → → → → in the direction of ω The angular acceleration vector α = dω /dt will be along ω → if |ω| increases with time, and will be opposite to ω if |ω| decreases with time, see Fig 8.5 α Slowing down ω Speeding up ω α ω Slowing down α ω Speeding up α Fig 8.5 Using the right-hand rule to obtain the direction of the vectors ω and α in cases of increasing and decreasing ω 8.5 Relating Angular and Linear Quantities When a rigid body rotates with angular velocity ω, every point on the body moves in a circle with its center on the rotational axis, see Fig 8.6 Because point P in the figure moves in a circle of radius r, this point defines a linear vector → v whose direction is 234 Rotational Motion always tangent to its circular path This tangential velocity has a magnitude defined by the tangential speed v = ds/dt, where s is the arc length traveled by point P along the circular path Recalling from Eq 8.2 that s = r θ and noting that r is constant, we find: dθ ds =r dt dt v= Fig 8.6 The Point P on a (8.9) y Circular path of P rotating rigid body has a tangential velocity → v which is always tangent to the circular P path of this point r O s x Rotational axis Using ω = dθ/dt, see Eq 8.6, we get: v =rω (Radian measure) (8.10) This relation indicates that, although ω is the same for every point on the rigid body, points on the object with different radii have different tangential speeds v In fact, the tangential speed v increases as one moves outward from the center of rotation When the angular speed ω is constant, then the linear speed v of any point on the rigid body is constant and hence undergoes uniform circular motion The period of one revolution T = 2π r/v and the frequency f (rev/s or Hz) can be written in terms of ω as follows: T= 2π ω , f = = (Radian measure) ω T 2π (8.11) We can find the magnitude of the tangential acceleration at of point P by differentiating Eq 8.10 with respect to time as follows: dv dω =r dt dt (8.12) (Radian measure) (8.13) at = Using α = dω/dt, see Eq 8.8, we get: at = r α 8.5 Relating Angular and Linear Quantities 235 In addition, we know that a point (or a particle) moving in a circular path of radius r with speed v undergoes a radial acceleration → a r of magnitude ar = v /r directed toward the axis of rotation Thus, by using v = r ω, the magnitude of the radial acceleration becomes: ar = r ω2 (Radian measure) (8.14) As shown in Fig 8.7, the total linear acceleration → a at point P is: → a =→ at + → ar (8.15) Fig 8.7 The total linear y acceleration → a of point P on a at rotating rigid body has two perpendicular components, the P a tangential component at and ar the radial component ar O x Rotation axis The magnitude of this acceleration is thus: a= at2 + ar2 = r α + r ω4 = r α + ω4 (8.16) Example 8.3 A typical compact disk (CD) rotates at 300 rev/min (a) What is the angular velocity of the disk? (b) What is the linear speed of a point P that lies cm from its axis, see Fig 8.8? (c) If one bit of data is represented at point P and has a length of L = 0.5 µm, find the number of bits N that the reading head can read per second Solution: (a) First, we write the frequency f in SI unit as follows: f = 300 rev min 60 s = rev/s = Hz 236 Rotational Motion Fig 8.8 Then, using Eq 8.11, the angular speed ω is: ω = 2π f = 31.4 rad/s (b) The linear speed of a point cm from the axis of the disk is: v = r ω = (4 × 10−2 m)(31.4 rad/s) = 1.26 m/s (c) Using NL = v, we get the number per second N to be: N= v 1.26 m/s = = 2.5 × 106 bits/s = 2.5 Mbps L 0.5 × 10−6 m Example 8.4 A grindstone of radius r = m rotates with an angular position θ = t + t − 2, where θ is in radians and t is in seconds (a) Find ω and α as a function of time and find their values at t = s (b) Find the speed v and the components of the acceleration a at t = s for a point on the rim of the grindstone Solution: (a) To find ω, we differentiate θ with respect to time: ω= d dθ = (t + t − 2) = (3 t + t) rad/s dt dt ⇒ ω|t=2 s = 20 rad/s To find α, we differentiate ω with respect to time: α= dω d = (3 t + t) = (6 t + 4) rad/s2 dt dt ⇒ α|t=2 s = 16 rad/s2 (b) Using Eqs 8.10, 8.13, and 8.14, we get: v = r ω = r(3 t + t) rad/s at = r α = r(6 t + 4) m/s2 ⇒ v|t=2 s = 40 m/s ⇒ at |t=2s = 32 m/s2 ar = r ω2 = r(3 t + t)2 m/s2 ⇒ ar |t=2 s = 800 m/s2