Đang tải... (xem toàn văn)
Bài giảng Power Point khá chi tiết và hệ thống làm nguội trong khuôn ép nhựa giúp cho các bạn sinh viên chuyên ngành Cơ khí chế tạo máy, Công nghệ tự động (trường Đại học Sư phạm Kỹ thuật thành phố Hồ Chí Minh)
. khuôn sẽ làm tăng thời gian làm nguội lên 4 lần Reynolds number Coolant ow types and corresponding Reynolds number ranges • ,! ,! - # • .!/ ! 0! ! • . as close to the mold surface as possible, but should pay attention to the mechanical strength of the material on site 2 System diameter should be greater than 8 mm (8mm or 10mm) for