Robot 4 • Go-Rilla 88 Drive Step: 20 Again, take a look at the smaller image; it shows how all of these pieces fit together from the front view of the drive sub-assembly. Inventing… Customizing the Go-Rilla The Go-Rilla’s center of gravity plays a very important role in allowing him to move so quickly—however, this also makes it one of the most difficult Droids in this book to customize. Any additions to one side of the Go-Rilla will have to be balanced out on the opposite side. For example, if you add some facial features to the front of the Go-Rilla, you will need to add something to its back as well to compensate for the shift in weight. 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 88 Robot 4 • Go-Rilla 89 Right Leg Step: Complete Here is what the right leg sub- assembly should look like when it is complete. Right Leg Step: 1 Right Leg Step: 2 The Right Leg Let’s begin constructing the right leg sub-assembly. 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 89 Robot 4 • Go-Rilla 90 Right Leg Step: 3 The Left Leg Left Leg Step: Complete Here is what the left leg sub-assembly should look like when it is complete. Left Leg Step: 1 Let’s begin constructing the left leg sub-assembly. 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 90 Robot 4 • Go-Rilla 91 Left Leg Step: 2 Left Leg Step: 3 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 91 Robot 4 • Go-Rilla 92 Final Assembly You are now ready to take all of the sub-assemblies you have made (the right and left leg sub- assemblies), and attach them to the drive sub-assembly. Final Assembly Step: Complete Here is what the Go-Rilla should look like when the final assembly is complete. Final Assembly Step: 1 Begin the final assembly by using a #3 axle to attach the right leg sub- assembly to the drive sub-assembly as shown. 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 92 Robot 4 • Go-Rilla 93 Final Assembly Step: 2 Use a #3 axle to attach the left leg sub-assembly to the drive sub- assembly as shown, and the Go-Rilla is complete! 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 93 227_LEGO_DSR_04.qxd 7/23/02 4:36 PM Page 94 Robot 5 95 X-Stormer 227_LEGO_DSR_05.qxd 7/29/02 9:35 AM Page 95 The X-Stormer, a four-legged transport and combat vehicle, was a prototype of what would eventually become the AT-AT. Imperial engineers worked for many years to create the X-Stormers, but once the newer AT-ATs were introduced to the Imperial Army, the X-Stormers were quickly phased out. However, many of them ended up on the black market, where they were picked up by a variety of interested buyers. Rumor has it that the Hutts own several of these surplus X- Stormers, although what they intend to do with them is unknown. The X-Stormer needs two rubber bands to make its head bounce up and down as it jumps. We recommend small rubber bands like the ones orthodon- tists use in dental work if you can find them. Bricks & Chips… Micro Scout Programs You can use any of the Micro Scout’s programs with the X-Stormer. Robot 5 • X-Stormer 96 227_LEGO_DSR_05.qxd 7/29/02 9:36 AM Page 96 Robot 5 • X-Stormer 97 The Body Body Step: Complete Here is what the body sub-assembly should look like when it is complete. Body Step: 1 Body Step: 2 Body Step: 3 227_LEGO_DSR_05.qxd 7/29/02 9:36 AM Page 97 [...]... 100 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 101 Robot 5 • X-Stormer Body Step: 13 Body Step: 14 101 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 102 Robot 5 • X-Stormer Body Step: 15 Body Step: 16 102 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 103 Robot 5 • X-Stormer Body Step: 17 Body Step: 18 103 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 104 Robot 5 • X-Stormer Body Step: 19 Body Step: 20 104 227 _LEGO_ DSR_05.qxd... 7/29/02 9: 36 AM Page 105 Robot 5 • X-Stormer Body Step: 21 Body Step: 22 105 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 1 06 Robot 5 • X-Stormer Body Step: 23 Body Step: 24 1 06 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 107 Robot 5 • X-Stormer Body Step: 25 Attach the 1x3 liftarms as shown (all pointing in the same direction) If you want the X-Stormer to walk instead of jump, put the 1x3 liftarms on one side. ..227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 98 Robot 5 • X-Stormer Body Step: 4 Body Step: 5 Body Step: 6 98 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 99 Robot 5 • X-Stormer Body Step: 7 Body Step: 8 Body Step: 9 Body Step: 10 99 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 100 Robot 5 • X-Stormer Body Step: 11 Insert the #5 axle through the middle hole of th 1x3 brick and the gears as shown... want the X-Stormer to walk instead of jump, put the 1x3 liftarms on one side pointing in the opposite direction from those on the other side (i.e pointing up on one side and down on the other) The Front Laser Front Laser Step: Complete Here is what the front laser sub-assembly should look like when it is complete Front Laser Step: 1 Front Laser Step: 2 107 . the drive sub- assembly as shown, and the Go-Rilla is complete! 227 _LEGO_ DSR_04.qxd 7/23/02 4: 36 PM Page 93 227 _LEGO_ DSR_04.qxd 7/23/02 4: 36 PM Page 94 Robot 5 95 X-Stormer 227 _LEGO_ DSR_05.qxd. the left leg sub-assembly. 227 _LEGO_ DSR_04.qxd 7/23/02 4: 36 PM Page 90 Robot 4 • Go-Rilla 91 Left Leg Step: 2 Left Leg Step: 3 227 _LEGO_ DSR_04.qxd 7/23/02 4: 36 PM Page 91 Robot 4 • Go-Rilla 92 Final. shown. 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 100 Robot 5 • X-Stormer 101 Body Step: 13 Body Step: 14 227 _LEGO_ DSR_05.qxd 7/29/02 9: 36 AM Page 101 Robot 5 • X-Stormer 102 Body Step: 16 Body Step: 15 227 _LEGO_ DSR_05.qxd