Networking: A Beginner’s Guide Fifth Edition- P9 doc

5 297 0
Networking: A Beginner’s Guide Fifth Edition- P9 doc

Đang tải... (xem toàn văn)

Thông tin tài liệu

22 Networking: A Beginner’s Guide N Difficult to back up Reliably backing up all the data scattered over many workstations is difficult, and it is not wise to delegate this job to the user of each machine. Experience shows that leaving this vital task up to users means it will not get done. N Hard to maintain version control In a peer-to-peer network, with files potentially stored on a number of different machines, it can become extremely difficult to manage different document versions. Pros for Client/Server Networks Client/server networks offer the opportunity for centralized administration, using equipment suited to managing and offering each resource. Client/server networks are the type commonly used for networks larger than about ten users, and there are quite a few good reasons for this, as follows: N Very secure A client/server network’s security comes from several things. First, because the shared resources are located in a centralized area, they can be administered at that point. Managing a number of resources is much easier if those resources are all located on one or two server computers, as opposed to needing to administer resources across tens or hundreds of computers. Second, usually the servers are physically in a secure location, such as a lockable server room. Physical security is an important aspect of network security, and it cannot be achieved with a peer-to-peer network. Third, the operating systems on which client/server networks run are designed to be secure. Provided that good security and administration practices are in place, the servers cannot be easily “hacked.” N Better performance While dedicated server computers are more expensive than standard computer workstations, they also offer considerably better performance, and they are optimized to handle the needs of many users simultaneously. N Centralized backup Backing up a company’s critical data is much easier when it is located on a centralized server. Often, such backup jobs can be run overnight when the server is not being used and the data is static. Aside from being easier, centralized backups are also much faster than decentralized backups. N Very reliable While it is true that more built-in redundancy exists with a peer-to-peer network, a good client/server network can be more reliable overall. Dedicated servers often have much more built-in redundancy than standard workstations. They can handle the failure of a disk drive, power supply, or processor and continue to operate until the failed component can be replaced. Also, because a dedicated server has only one relatively simple job to do, its complexity is reduced and its reliability increased. Contrast this with a peer-to-peer network, where actions on the part of the users can drastically reduce each workstation’s reliability. For example, needing to restart a PC or a Macintosh every so often is not uncommon, whereas dedicated servers often run for months without requiring a restart or crashing. 23 Chapter 3: Understanding Networking Cons for Client/Server Networks Client/server networks have some drawbacks, particularly for companies that don’t have their own in-house network administration or that want to minimize the expense of the network as much as possible. The following are the disadvantages of client/ server networks: N Require professional administration Client/server networks usually need some level of professional administration, even if they are small. Knowing the ins and outs of a network operating system is important, and requires experience and training. You can hire a network administrator, or you can use a company that provides professional network administration services. N More hardware-intensive In addition to the client computers, you also need a server computer, usually a pretty “beefy” computer with a lot of memory and disk space. Plus, you need a network operating system and an appropriate number of client licenses, which can add at least several thousand dollars to the cost of the server. For large networks, these requirements add tens of thousands of dollars. In a nutshell, choose a peer-to-peer network for smaller networks with fewer than 10 to 15 users, and choose a client/server network for anything larger. Because most networks are built on a client/server concept, this book generally assumes such a network. Learning Network Features Now that you know the two basic ways computers on a network can interact with each other, let’s look at the types of tasks you can do with a network. The following sections discuss common network features and capabilities. File Sharing Originally, file sharing was the primary reason to have a network. In fact, small and midsize companies in the mid-1980s usually installed networks just so they could perform this function. Often, this was driven by the need to computerize their accounting systems. Of course, once the networks were in place, sharing other types of files became easier as well. File sharing typically involves word processing files, spreadsheets, and other files to which many people needed regular access. It requires a shared directory or disk drive that many users can access over the network, along with the underlying programming logic needed to make sure that more than one person doesn’t make changes to a file at the same time (called file locking). The reason you don’t want multiple people making changes to a file at the same time is that they might both be making conflicting changes simultaneously, without realizing it. Most software programs don’t have the ability to allow multiple changes to a single file at the same time and to resolve problems that might arise. 24 Networking: A Beginner’s Guide NOTE Most database programs do allow multiple users to access a database simultaneously. Often, this is done using a technique called row locking, which restricts changes to any given record to only one user at a time. Network operating systems that perform file sharing also administer the security for the shared files. This security can control, with a fine level of detail, who has access to which files and what kinds of access they have. For example, some users might have permission to view only certain shared files, while others have permission to edit or even delete certain shared files. Printer Sharing A close runner-up in importance to file sharing is printer sharing. While it is true that laser printers are currently so inexpensive that you can afford to put one in every office if you wish, sharing laser printers among the users on the network is still more economical overall. Printer sharing enables you to reduce the number of printers you need and also to offer much higher-quality printers. Newer digital copiers that can handle large print jobs at more than 80 pages per minute and provide special printing features can cost more than $20,000. Sharing such printers among many users makes sense. Printer sharing can be done in several ways. The most common way is to use print queues on a server. A printer queue holds print jobs until any currently running print jobs are finished, and then automatically sends the waiting jobs to the printer. Using a print queue is efficient for the workstations because they can quickly print to the print queue and don’t need to wait for the printer itself to process any waiting print jobs. Another way to share printers on a network is to let each workstation access the printer directly (most printers can be configured so they are connected to the network just like a network workstation). In this case, usually each workstation must wait its turn if many workstations are vying for the printer. Networked printers that use printer queues have a print server that handles the job of sending each print job to the printer in turn. The print server function can be filled in a number of ways: N By a file server that is connected either directly or across the network to the printer. N By a computer connected to the network, with the printer connected to that computer. The computer runs special print server software to perform this job. N Through the use of a built-in print server on a printer’s network interface card (NIC), which contains the hardware necessary to act as a print server. For example, many laser printers offer an option to include a NIC in the printer. This is far less expensive than dedicating a stand-alone computer to the job. 25 Chapter 3: Understanding Networking N Through the use of a dedicated network print server, which is a box about the size of a deck of cards that connects to the printer’s parallel or USB port (or even a wireless 802.11 protocol connection) on one end and the network on the other end. Dedicated print servers also contain the hardware necessary to act as print servers. This can be a good option when you need to share a printer that does not contain the necessary networking connections. Application Services Just as you can share files on a network, you can often also share applications. For example, if you have the proper type of software license, you can have a shared copy of some applications stored on the network server. When a workstation wants to run the program, it loads the files from the network into its own memory, just as it would from a local disk drive, and runs the program normally. Keeping applications centralized reduces the amount of disk space needed on each workstation and makes it easier to administer the application. (For instance, with some applications, you need to upgrade only the network copy; with others, you also must perform a brief installation for each client.) Another application service you can host on the network is a shared installation point for applications. Instead of needing to load a CD-ROM onto each workstation to install an application, you can usually copy the contents of the CD-ROM to a folder on a server, and then have the installation program run from that folder for each workstation. This makes installing the applications much faster and more convenient. CAUTION Make sure any applications you host on a network server are licensed appropriately. Most software licenses do not let you run an application on multiple computers. Even if you need only one actual copy of the application to set up the files on the server, you still must have a license for every user. Different applications have different fine print regarding licensing—some require one license per user, some require one license per computer, some allow your network users to use a copy at home freely, and so forth. Make sure to carefully read the license agreements for your business software and adhere to their terms and conditions. E-mail An extremely valuable and important network resource these days is e-mail. Not only can it be helpful for communications within a company, but it is also a preferred vehicle to communicate with people outside a company. E-mail systems are roughly divided into two different types: file-based and client/ server. A file-based e-mail system is one that consists of a set of files kept in a shared location on a server. The server doesn’t actually do anything beyond providing access to the files. Connections required from a file-based e-mail system and the outside (say, to the Internet) are usually accomplished with a stand-alone computer—called a gateway server—that handles the e-mail interface between the two systems, by using gateway software that is part of the file-based e-mail system. 26 Networking: A Beginner’s Guide In a client/server e-mail system, an e-mail server contains the messages and handles all the e-mail interconnections, both within and outside the company. Client/ server e-mail systems, such as Microsoft Exchange and Lotus Notes, are more secure and far more powerful than their file-based counterparts. They often offer additional features that enable you to use the e-mail system to automate different internal business processes, such as invoicing and purchasing. For smaller companies (with fewer that 25 employees), e-mail is just as important, but an e-mail server or dedicated e-mail system is usually overkill and too costly to purchase and maintain. These companies can use other strategies that do not require running their own internal e-mail system (file-based or client/server), such as the following: N Install a shared connection to the Internet that all of their computers can access, and then set up e-mail accounts either through their Internet service provider (ISP) or a free e-mail service, such as Yahoo! Mail or Google’s Gmail. N Run Microsoft Windows Small Business Server 2008, which includes a limited version of Exchange Server, along with other server-based applications that are packaged together to make them more economical for smaller companies. N Use mailboxes from a service provider that runs a high-end e-mail system (and handes administration and backups). Companies usually pay a monthly fee for the number of mailboxes used. Remote Access Another important service for most networks is remote access to the network’s resources. Users use this feature to access their files and e-mail when they’re traveling or working from a remote location, such as a hotel or their home. Remote access systems come in many different flavors. The following are some of the methods used to provide remote access: N Set up a simple remote access service (RAS) connection on a Windows server, which can range from using a single modem to a bank of modems. N Use a dedicated remote access system, which handles many simultaneous connections and usually includes many computers, each on its own stand-alone card. N Employ a workstation on the network and have users dial in using a remote control program like Symantec’s pcAnywhere or Citrix’s GoToMyPC. N Set up a virtual private network (VPN) connection to the Internet, through which users can access resources on the company network in a secure fashion. N Install Windows Terminal Services (on a Windows server) or Citrix XenDesktop, which allow a single server to host multiple client sessions, each appearing to the end user as a stand-alone computer. . to a single file at the same time and to resolve problems that might arise. 24 Networking: A Beginner’s Guide NOTE Most database programs do allow multiple users to access a database simultaneously using gateway software that is part of the file-based e-mail system. 26 Networking: A Beginner’s Guide In a client/server e-mail system, an e-mail server contains the messages and handles all the. required from a file-based e-mail system and the outside (say, to the Internet) are usually accomplished with a stand-alone computer—called a gateway server—that handles the e-mail interface between

Ngày đăng: 05/07/2014, 04:20

Từ khóa liên quan

Mục lục

  • Contents

  • Acknowledgments

  • Introduction

  • Part I: Networking Ins and Outs

    • 1 The Business of Networking

      • Understanding Networking: The Corporate Perspective

      • Understanding Networking Jobs

      • Sarbanes-Oxley Act of 2002

      • Chapter Summary

      • 2 Laying the Foundation

        • Bits, Nibbles, and Bytes

        • Basic Terminology to Describe Networking Speeds

        • Chapter Summary

        • 3 Understanding Networking

          • Knowing Network Relationship Types

          • Learning Network Features

          • Understanding the OSI Networking Model

          • Learning About Network Hardware Components

          • Chapter Summary

          • 4 Understanding Network Cabling

            • Understanding Cable Topologies

            • Demystifying Network Cabling

            • Installing and Maintaining Network Cabling

            • Chapter Summary

            • 5 Home Networking

              • Benefits from Home Networking

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan