LIST OF ATTEMPTED QUESTIONS AND ANSWERS Multiple Choice Multiple Answer Question This Question refers to the case of 'Hansa Tractomotive Ltd.' : After completion of manufacturing, Jay Jee took following actions :- Correct Answer Dispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced amount , Did not send the consignment by Hansa's designated carrier Your Answer Did not send the consignment by Hansa's designated carrier , Dispatched the consignment by Express Roadlines by truck , Raised the Hundi for the invoiced amount Multiple Choice Single Answer Question This Question refers to the case of 'Universal Fasteners Ltd.' : During the meeting with G.M (Mr. Kaul) Store Keeper Mr. Bapat informed that purchases were made from :- Correct Answer Several sources Your Answer Several sources Multiple Choice Single Answer Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : One of the following is not a variable overhead:- Correct Answer Space Your Answer Space True/False Question This Question refers to 'Uday Electroplating Shop' : As per cost figures collected, Expected volume of work on special equipment next year is 10,000 Nos. Correct Answer True Your Answer True Multiple Choice Single Answer Question This Question refers to the case of Narmada Electricals Ltd.: In the existing method, the scarp generated in processes like machining was stored in :- Correct Answer Scrap yard Your Answer Scrap yard Match The Following Question Correct Answer Your Answer Anonymous letter received by M.D. Need to justify Need to justify This question refers to the case of 'Northern Machinery Ltd.' : Senior buyers Seen in top hotels with suppliers No material facts to support the arguments Reason for failure to convince the Board of Directors No material facts to support the arguments No confidence in Material manager and Senior buyers Lot of items on the agenda Need to be concise and to the point Need to be concise and to the point Multiple Choice Multiple Answer Question This Question refers to the case of 'Divgi Metalwares Private Limited' : The new items contracted by the company are handled by the development department for :- Correct Answer Submission of samples , Manufacture of one or two production lots , Transfer to manufacturing department for regular production, after successful development Your Answer Submission of samples , Manufacture of one or two production lots , Transfer to manufacturing department for regular production, after successful development Multiple Choice Multiple Answer Question This Question refers to the case of 'Classic Engineering Components Ltd.' : The company has well established machine shop having more than 150 machines and :- Correct Answer A heat treatment shop , Metrology section , Packing section Your Answer A heat treatment shop , Metrology section , Packing section Multiple Choice Single Answer Question This Question refers to the case of 'The Gujrat Engineering company Limited' : The company also executes :- Correct Answer Rush orders Your Answer Rush orders Select The Blank Question This Question refers to 'Uday Electroplating Shop' :The owner finds it ________ to get part time employees when there is heavy work load. Correct Answer Difficult Your Answer Difficult Multiple Choice Single Answer Question The question refer to the case on 'Kalpak Engineers' :Kalpak Engineers have contracted from a boiler company manufacturing of 500 nos of stay bolt. In the manufacturing process grinding operation is carried out on following machine :- Correct Answer Cylindrical grinder Your Answer Cylindrical grinder Multiple Choice Single Answer Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Process sheet for exhaust manifold provides following information:- Correct Answer Jigs and fixtures required Your Answer Jigs and fixtures required Multiple Choice Multiple Answer Question This Question refers to the case of 'Classic Engineering Components Ltd.' : The company supplies components to :- Correct Answer Automobile industries , Printing machines , Machine tool & process equipment industries Your Answer Automobile industries , Printing machines , Machine tool & process equipment industries True/False Question This Question refers to the case of 'Classic Engineering Components Ltd.' : Mr. Sen noticed that each worker was provided with the drawing of the component. Correct Answer False Your Answer False Multiple Choice Multiple Answer Question This Question refers to the case of 'Eagle Machine Company' : Cost of running Sally's department is Rs 3,70,000 per year. This is on account of :- Correct Answer Salaries , Fringes , Expenses Your Answer Salaries , Fringes , Expenses Select The Blank Question This Question refers to t he case 'Quality Gauges Pvt. Ltd.' : After the introduction of scheme, shop floor manager has complained of pressure from workmen for ________. Correct Answer Overtime Your Answer Overtime Match The Following Question Correct Answer Your Answer Test of viability of standards Production study Production study This question refers to case on 'Morbay Engineering Works (MEW)' : Guaranteed time wage Scanlon Plan Predetermined Method Time standards Base wage rate Job Evaluation Work Measurement Fixation of Performance standard Work Measurement Job Evaluation Select The Blank Question This Question refers to the case of 'The Irate Vendor' : Jones had been brought in by a management consultant to ________ the department's buying activities. Correct Answer Centralize Your Answer Centralize Multiple Choice Single Answer Question This Question refers to the case of 'Kerson Automobiles' : It was decided to modify the existing layout of the plant in the year :- Correct Answer 1972 Your Answer 1972 Multiple Choice Multiple Answer Question This Question refers to the case of 'The Gujrat Engineering company Limited' : The company has received a special order where : - Correct Answer A special cylinder is to be manufactured. , The item is to be manufactured from a hollow bored forging , Fastest delivery is requested Your Answer A special cylinder is to be manufactured. , The item is to be manufactured from a hollow bored forging , Fastest delivery is requested Select The Blank Question This question refer to the case on "Allied Industries Pvt Ltd" : One of the assumptions of the case is- other incidental costs (e.g. paper work, Transport charges for acquiring and regrinding thread roll) are ________. Correct Answer Negligible Your Answer Low Select The Blank Question This Question refers to the case of 'Artwood Products' : The ________ furniture is sold through distributors. Correct Answer Standard Your Answer Standard Multiple Choice Single Answer Question This Question refers to the case of 'Divgi Metalwares Private Limited' : It is a :- Correct Answer Light engineering company Your Answer Light engineering company True/False Question This question refers to c ase on 'Uma Tools Pvt Ltd (UTPL)' : The average efficiency on the other components currently being produced is around 75%. Correct Answer True Your Answer True Multiple Choice Multiple Answer Question This Question refers to the case 'Suyog Udyog' : The process involves the use of :- Correct Answer HMT M-2V machine , HMT-2U machine , Investa Pillar drill Your Answer HMT M-2V machine , HMT-2U machine , Investa Pillar drill Select The Blank Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : Jigs and fixtures once provided will be able to maintain accuracy up to about ________ pieces. Correct Answer 20000 Your Answer 20000 True/False Question This question refers to case on 'Morbay Engineering Works (MEW)' : "It is difficult to install an incentive scheme and easy to withdraw when desired." Correct Answer False Your Answer True True/False Question This Question refers to the case 'Suyog Udyog' : The operation time for C' sunk 14 dia holes on both sides is 0.50 per piece. Correct Answer True Your Answer True Multiple Choice Multiple Answer Question This Question refers to the case of 'The Geer Company' : Problems got created due to :- Correct Answer Added work load in purchasing , Divided buying responsibilities , Number of inexperienced buyers Your Answer Added work load in purchasing , Divided buying responsibilities , Number of inexperienced buyers Multiple Choice Single Answer Question This Question refers to the case 'Indus Foundries Ltd.': The company is faced with following problems :- Correct Answer Choice of Location Your Answer Choice of Plant machinery Multiple Choice Multiple Answer Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Following is the information requirement for using CPM/PERT techniques:- Correct Answer List of activities , Activity duration , Precedent relationship of the activities Your Answer List of activities , Activity duration , Person responsible for activity completion Multiple Choice Single Answer Question This question refers to case on 'Morbay Engineering Works (MEW)' : The success of an incentive plan to a large extent depends on the following factor:- Correct Answer Quality of performance standard Your Answer Production Planning and Control system Multiple Choice Multiple Answer Question This question refers to case on 'Morbay Engineering Works (MEW)' : Following systems are prerequisites for an incentive scheme:- Correct Answer Good production planning and control system , Good Inspection and quality control system , Sound system of accounting operators daily output Your Answer Good production planning and control system , Good Inspection and quality control system , Sound system of accounting operators daily output Select The Blank Question This Question refers to the case of 'K.T Gears' : The problem envisages determining the rate of ________ before and after improvement in the existing method. Correct Answer Production Your Answer Speed Multiple Choice Multiple Answer Question This Question refers to the case of 'The Geer Company' : The problems reported are :- Correct Answer Delays in placing orders , Frequently late deliveries , Incorrect ordering quantities Your Answer Delays in placing orders , Frequently late deliveries , Incorrect ordering quantities Multiple Choice Single Answer Question This question refers to case on 'Morbay Engineering Works (MEW)' : Following practice if prevalent, must be eliminated to guarantee success of wage incentive scheme :- Correct Answer Overtime Your Answer Encashment of leave True/False Question This Question refers to the case of 'Universal Fasteners Ltd.' : The organization has reputation for poor deliveries. Correct Answer False Your Answer False Multiple Choice Single Answer Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : Use of Network Techniques beside computing project duration also helps in the following :- Correct Answer Possibilities of reducing project duration Your Answer Computing manpower requirement Multiple Choice Single Answer Question The question refer to the case on 'Kalpak Engineers' : This case is concerned with following element of production planning:- Correct Answer Routing Your Answer Scheduling Multiple Choice Single Answer Question This Question refers to the case of 'Hansa Tractomotive Ltd.' : The machines were completed by Kay Jee :- Correct Answer Within the stipulated delivery period Your Answer Within the stipulated delivery period Select The Blank Question This Question refers to the case of 'Kerson Automobiles' : The pedestal grinder mounted on the huge work table, gives out ________ and blows out dust. Correct Answer Sparks Your Answer Sparks Select The Blank Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : In machining Exhaust Manifold, no cutting oil is required as the material is ________. Correct Answer Cast iron Your Answer Plastic Select The Blank Question This question refers to case on 'Morbay Engineering Works (MEW)' : Success of wage incentive plans to a large extent depends on the ________ of performance standards. Correct Answer Quality Your Answer Quality True/False Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : The cost of foundry reject is borne by the company. Correct Answer True Your Answer True True/False Question This question refers to the case of 'Northern Machinery Ltd' : As per summary of purchases of the last year, Material cost as a proportion of sales is 26%. Correct Answer False Your Answer True True/False Question This Question refers to the case 'Quality Gauges Pvt. Ltd.' : The executives were entitled for incentive bonus. Correct Answer True Your Answer True Select The Blank Question This Question refers to the case 'Suyog Udyog' : Number of work stations are to be decided based on assumption that monthly off take is ________ numbers. Correct Answer 8000 Your Answer 8000 [...]... refer to the case on 'Kalpak Engineers' : First operation Saw off Saw off Consecutive operations Copy turning machine Copy turning machine Last machining operation Thread rolling Thread rolling Multiple Choice Single Answer Question The question refer to the case on 'Kalpak Engineers' : In the case for all machining operations following data on time is furnished:Correct Answer Setup time and standard... received on schedule , Was priced 15 % lower than the price of the previous supplier , Had missed out carrying out some machining operations Your Answer Was received on schedule , Was priced 15 % lower than the price of the previous supplier , Had missed out carrying out some machining operations Multiple Choice Multiple Answer Question This question refer to the case on "Allied Industries Pvt Ltd" : Variable... Select The Blank Question This Question refers to the case of 'The Geer Company' : The volume of growth tripled due to management Correct Answer Aggressive Your Answer Aggressive Multiple Choice Single Answer Question This Question refers to the case of 'K.T Gears' : One of the operations recently studied by the methods study practitioner at this company concerns is :Correct Answer Cutting of groove... turnover and frequent work allocation , Management has been requested to get the crack detection machine repaired Your Answer Raw Material received was without test certificate and was not inspected by the inspector , Laid down procedure for processes of heat treatment, painting etc are not followed due to heavy labour turnover and frequent work allocation , Management has been requested to get the... This Question refers to the case of 'The Irate Vendor' : Jones had been brought in by a management consultant to the department's buying activities Correct Answer Centralize Your Answer Consolidate Multiple Choice Multiple Answer Question This question refers to 'Automotive Gears Private Limited' : For Hob splines Operations, it uses :Correct Answer Cleaveland Hobbing machine , Newark Hobbing machine... Multiple Choice Single Answer Question This question refers to case on 'Morbay Engineering Works (MEW)' : Incentive schemes can not be considered to be a substitute of the following:Correct Answer Poor management Your Answer Low manufacturing cost True/False Question This Question refers to the case 'Indus Foundries Ltd.' : Skilled manpower at worker level is not available in plenty at Kolhapur Correct... performance standard Your Answer Production Planning and Control system Select The Blank Question This question refers to case on 'Weldtech India Pvt Ltd (WIPL)' : In order to save time in construction the management purchased a Correct Answer Factory-building Your Answer Godown Multiple Choice Multiple Answer Question This Question refers to the case of National Engineering Co Correct Answer Despatched... Multiple Choice Single Answer Question This question refers to case on 'Morbay Engineering Works (MEW)' : Incentive schemes can not be considered to be a substitute of the following:Correct Answer Poor management Your Answer Low manufacturing cost Select The Blank Question This question refers to case on 'Uma Tools Pvt Ltd (UTPL)' : In machining Exhaust Manifold, no cutting oil is required as the material... Automobile industries , Printing machines , Machine tool & process equipment industries Multiple Choice Multiple Answer Question The question refer to the case on 'Kalpak Engineers' : Following are the operations involved in manufacturing stay bolt in the case:Correct Answer Copy turning , Thread Rolling , Drilling Your Answer Threading , Copy turning , Thread Rolling Multiple Choice Single Answer Question... accepted because :Correct Answer It was not the lowest Your Answer It was not the lowest Multiple Choice Multiple Answer Question This question refers to 'Automotive Gears Private Limited' : For Hob splines Operations, it uses :Correct Answer Cleaveland Hobbing machine , Newark Hobbing machine , Thread Milling machine Your Answer Cleaveland Hobbing machine , Newark Hobbing machine , Thread Milling machine . out some machining operations Your Answer Was received on schedule , Was priced 15 % lower than the price of the previous supplier , Had missed out carrying out some machining operations Multiple. that monthly off take is ________ numbers. Correct Answer 8000 Your Answer 8000 Cases in Operation Management LIST OF ATTEMPTED QUESTIONS AND ANSWERS Multiple Choice Single Answer Question This Question. This Question refers to the case of 'The Irate Vendor' : Jones had been brought in by a management consultant to ________ the department's buying activities. Correct Answer Centralize Your