Add or Modify the OEM Logo and Information 1. Click Start, type: regedit.exe and press ENTER: 2. Navigate to the following location: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ OEMInformation If the OEMInformation key is missing, you’ll need to create one manually. 3. Create string values (REG_SZ) and add matching data, as per the table below: Value name Data Value type Logo <Path to your logo file>* REG_SZ Manufacturer <System manufacturer name> REG_SZ Model <System Model number> REG_SZ SupportHours <Support hours> REG_SZ SupportPhone <OEM Support Phone number> REG_SZ SupportURL <OEM Support URL> REG_SZ And the related registry entries. 4. Exit Registry Editor. * Note: The logo should be a BMP file with the dimension of 120×120. Logos larger than 120×120 pixels are scaled to 120×120. Sample I’ve customized the support information page by populating it with sample entries. Here is the screenshot: Kitchen God Good Luck!!! . Add or Modify the OEM Logo and Information 1. Click Start, type: regedit.exe and press ENTER: 2. Navigate to the following location: HKEY_LOCAL_MACHINE. SupportPhone < ;OEM Support Phone number> REG_SZ SupportURL < ;OEM Support URL> REG_SZ And the related registry entries. 4. Exit Registry Editor. * Note: The logo. CurrentVersion OEMInformation If the OEMInformation key is missing, you’ll need to create one manually. 3. Create string values (REG_SZ) and add matching data, as per the table below: Value