Đang tải... (xem toàn văn)
steel designers manual
[...]... application xi Steel Designers' Manual - 6th Edition (2003) xii Introduction to sixth edition This material is copyright - all rights reserved Reproduced under licence from The Steel Construction Institute on 12/2/2007 To buy a hardcopy version of this document call 01344 872775 or go to http://shop.steelbiz.org/ The fifth edition was published in 1992 and proved to be a very worthy successor to its antecedents... 30) Steel Designers' Manual - 6th Edition (2003) xiv Introduction to sixth edition Construction: Chapters 31–35 Important aspects of steel construction about which a designer must be informed if he is to produce structures which can be economically fabricated, and erected and which will have a long and safe life This material is copyright - all rights reserved Reproduced under licence from The Steel. .. designing in steel and reinforced concrete xv Steel Designers' Manual - 6th Edition (2003) xvi Contributors before specializing in soil mechanics and foundation design in 1970 Between 1974 and 1993 he worked in the offshore industry, becoming a specialist in steel piling He joined SCl in 1994 as manager for civil engineering and has developed the R&D research project work in steel piling related topics... on steel design Graham Owens Steel Designers' Manual - 6th Edition (2003) Contributors This material is copyright - all rights reserved Reproduced under licence from The Steel Construction Institute on 12/2/2007 To buy a hardcopy version of this document call 01344 872775 or go to http://shop.steelbiz.org/ Harry Arch Harry Arch graduated from Manchester Faculty of Technology For many years he worked.. .Steel Designers' Manual - 6th Edition (2003) This material is copyright - all rights reserved Reproduced under licence from The Steel Construction Institute on 12/2/2007 To buy a hardcopy version of this document call 01344 872775 or go to http://shop.steelbiz.org/ Introduction to sixth edition At the instigation of the Iron and Steel Federation, the late Bernard Godfrey... Engineers in the production of Steel Designers' Manual - 6th Edition (2003) Contributors xxiii technical publications relating to steelwork connections He also compiled the National Structural Steelwork Specification for Building Construction, which is now in its 4th Edition Paul Tasou This material is copyright - all rights reserved Reproduced under licence from The Steel Construction Institute on... the use of aluminium has been deemed to better serve the specification Typical external and internal coatings for steel substrates manufactured by Corus (formerly British Steel plc/Hoogovens) are detailed below Substrate – steel • • Galvatite, hot-dipped zinc coated steel to BS EN10147: 1992 Grade Fe E220G with a Z275 zinc coating Galvalloy, hot-dipped alloy-coated steel substrate (95% zinc, 5% aluminium)... restrained, out-of-plane forces are generated More complicated shapes have to be rolled rather than press braked This is a feature of the UK, where the market is supplied by relatively few manufacturers and the volumes produced by each allow the advanced manufacturing techniques to be employed, giving competitive products and service As roof pitches become lower, modi ed Zed sections have been developed... are used by kind permission of the British Constructional Steelwork Association, the publishers These permissions are gratefully acknowledged Finally I would like to pay tribute both to the 38 authors who have contributed to the sixth edition and to my hard-working principal editor, Dr Buick Davison All steelwork designers are indebted to their efforts in enabling this text book to be maintained as... Speci ed minimum ultimate tensile strength of steel Buckling parameter of the section Shear force Shear resistance per unit length of beam in composite construction Shear buckling resistance of stiffened web utilizing tension field action Steel Designers' Manual - 6th Edition (2003) Notation Vcr v W or or or w This material is copyright - all rights reserved Reproduced under licence from The Steel Construction . sixth edition xiii Steel Designers& apos; Manual - 6th Edition (2003) This material is copyright - all rights reserved. Reproduced under licence from The Steel. designing in steel and reinforced concrete xv Steel Designers& apos; Manual - 6th Edition (2003) This material is copyright - all rights reserved. Reproduced under