New and improved Products in the FIBRO Standard Parts Catalogue 2008 2130.12. Lifter Studs with cable securing device c 10 2022.16.45. Guide Pillars with groove to CNOMO standard d 29, d 123 2132.10.x.1. Bushes for Lifting Bolts c 25 2192.61. Flat Mushroom Head Screws with hexagon socket c 47 2022.13. Guide Pillars with pilot taper 5° d 28, d 122 2053.70. Thrust Washers, Bronze with Non-Liquid Lubricant d 101 2087.72. Oilless Guide Bushes with Collar, Bronze with Non-Liquid Lubricant d 111 2961.74. Retaining Plates VDI 3357, Bronze with Non-Liquid Lubricant d 128 2961.81. Retaining Plates VDI 3357, Steel with Non-Liquid Lubricant d 130 2962.78.45. Sliding Pads, Bronze, with non-liquid lubricant, to CNOMO standard d 145 2192.12. Hexagon Socket Head Cap Screws DIN 912 / ISO 4762 c 43 2961.79. Retaining Plates VDI 3357, Steel d 129 2091.71. Guide Pillars with groove to CNOMO standard d 84 - d 86 2102.70. Guide Bushes with Collar to AFNOR, Bronze with Non-Liquid Lubricant d 67 2102.71. Guide Bushes with Collar to AFNOR, Bronze d 67 2445.11. Centring Pins to Daimler standard d 215 2967.11. Sliders for transverse bolt guide d 201 2965.82.45. Single-sided Prismatic Sliding Blocks, Steel, to CNOMO standard d 197 2072.48.45. Screw Clamps to CNOMO standard d 224 2963.85. Prismatic Guides, Steel d 189 2960.81. Sliding Pads, VDI 3357, Bronze with Non-Liquid Lubricant d 161 2960.88. Sliding Pads, VDI 3357, Steel d 162 2073.45. Securing Flanges d 224 2965.80.45. Single-sided Prismatic Guides, Bronze, with non-liquid lubricant, to CNOMO standard d 196 2963.84. Sliding Blocks, VDI 3357, Bronze with Non-Liquid Lubricant d 189 2443.13. Guide with Part Position Control d 228 2962.70.45. Angled Guide Gibs, Bronze with non-liquid lubricant, to CNOMO standard d 179 2960.44.45. Sliding Pads, Steel, with oil lubricating grooves, to CNOMO standard d 158 – d 159 2962.75.45. Guide Bars, with two sliding surfaces, Bronze with Non-Liquid Lubricant, to CNOMO standard d 165 2960.54.45. Sliding Pads, Bronze, with oil lubricating grooves, to CNOMO standard d 160 2962.85. Sliding Pads, Steel with non-liquid lubricant d 150 2962.84.45. Sliding Pads, Steel, to CNOMO standard d 148 2962.78. Sliding Pads, Bronze with Non-Liquid Lubricant d 146 - d 147 2480.019.45. Thrust Plate f 285 2480.011.10000. Flange Plate f 152 237.1. Hardened Ejector Pins , similar to DIN 1530, Shape A - ISO 6751 e 116 2478.20.20.1. 2478.20.20.2. Guide Pillars and Sleeves for Lifting Units to Daimler standard f 102– f 103 2482.73. .1 Gas Springs, small dimensions and low forces f 130 – f 131 2480.12.00750. Gas Springs f 144 – f 145 2361.1. Precision Dowel Pins with internal extracting thread similar to DIN EN ISO 8735/ISO 8735 e 110 2480.00.51.05 Box Spanner f 250 2351.1. Precision Dowel Pins similar to DIN EN ISO 8734/ ISO 8734 e 113 244.17. Shoulder Screws f 78 244.9. Spacer Tubes f 73 244.10. Stop Washers f 74 2480.00.39.04 Multiple Control Fitting, Connection Adaptor f 310 2198.50.55. Spring mounted Rollers j 9 2480.00.23.13. Anti-scuff spiral f 295 – f 304 2491. Air Springs, to VW standard Please request your catalogue f 279 2487.12.00750. 2487.12.01000. Gas Springs with increased spring force Power Line f 184 – f 187 2486.12. »Speed Control TM « SPC Gas Springs, cushioned f 227 – f 237 subject to alterations 4 B Precision Ground Plates and Flat Bars Steel and aluminium Plates Flat and square Tool Steels C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements Pillars, Bushes, Mounting Flanges, Ball Cages, Oilless Guide Elements E Ground Precision Components Punches and Matrixes, Pins, Ejector Pins, Gauge Pins F Springs Compression Springs, Gas Springs, Elastomer Springs Spring and Spacer Units G Elastomer-Bars, -Sheets, -Sections FIBROFLEX® and FIBROELAST®-Sheets and -Profiles H FIBRO Chemical Tooling Aids Tooling Resin, Metal Adhesives, Degreasing Agent, Corrosion Protection Agent, Oils J Peripheral Equipment for Presses, Tool Manifacture Conveyor Belts, Assembly Aids K Slide Units Hydraulic Cam System, Cam Slide Units, Roller Slide Units L Standard Parts for Mould Making A Die Sets Cast Iron, Steel and Aluminium Die Set Press Units, Lamination Die Set Units, Tooling Pallet Die Sets FIBRO - your production partner Hassmersheim plant Standard Parts Weinsberg plant Rotary Tables From 1962 onwards FIBRO pioneered the design and manufacture of rotary tables and soon gained an enviable reputation. FIBROTAKT ® indexing tables with face gear and ultra-high precision indexing, together with dependable rigidity. Drive options: pneumatic, hydraulic via rack and pinion or electric with worm drive. FIBROPLAN ® NC – indexing tables with backlash adjustment worm drive or torque motor for use in machine tools for universal positioning and round and multi-axis processes (simultaneous operation). FIBROTOR ® revolving tables and indexing tables with positive drive cam, offering very short cycle times even when transporting heavy loads. Mainly used in non- machining applications. Thousands of FIBRO units are in use world-wide as integral key components in high- output machinery. Today the Standard Parts Division operates from the Hassmersheim and Weinsberg works, which manufacture a comprehensive range of standard parts and maintain stocks ready for immediate despatch world-wide. The machine tool, mechanical engineering and systems engineering product ranges have been developed to meet the needs of customers. They include steel die sets, guide elements, oilless guide elements and precision components such as punches and matrixes, special steel compression springs, gas springs, forming materials, metal bonding agents, moulding resins, peripheral equipment for pressing and tool making, tool slides with cam or roller slides and hydraulic cam systems. FIBRO has become renowned world-wide for its comprehensive range of products in stock and its readiness to deliver. FIBRO – an internationally successful company. As a market leader in Standard Parts, Rotary Indexing Tables and Automation, FIBRO provides products and solutions to ensure your production keeps moving. So what is the secret of the FIBRO success? Products developed in-house, tailor-made for the market with uncompromising quality. But good products are not enough on their own. FIBRO combines excellent products, the know-how and service competence of an internationally focused company, matched to the actual needs of customers - wherever they are. Automation FIBRO has been active in the field of automation and robotics since 1974 and offers one of the most comprehensive ranges in this field. A cleverly designed modular system based on translation units, rotary units, grippers, and guide gantries with trolleys make for easy construction of individual machines and complete systems, ranging from simple pick & place units right up to multi-axis robots. These series- manufactured modules with electric, pneumatic or hydraulic drive, guarantee both high functional reliability and cost-effective prices. The modular gantry systems can solve virtually any transporting problem using linear gantries, surface gantries and extension gantries. These systems are being used successfully in many industries world- wide. Applications include linking machine tools (automotive production), tool changing in machining facilities, palletising work pieces, unloading injection moulding dies, PCB feeders, press linking, palletising, stacking, loading and unloading, transporting and flexible linking, storage and buffering of work pieces of different sizes. Since its establishment in 1974 GSA Automation GmbH has developed to become a world market leader in the manufacture of handling equipment and transport systems. Over this period GSA has installed over 200 fully automated systems for all the leading automotive and machine tool manufacturers. GSA has been a member of the FIBRO group since 2004. Our production range consists of linear and surface gantry systems, transport systems such as precision roller guides, accumulating chain conveyors, pallet accumulating conveyors and flexible decoupling modules,shelf stacking systems and pallet mechanical handling systems. We can provide our customers with dependable state of the art high performance systems from our standard range. We take complete responsibility for the complete project, starting with designing the solution concepts at the design phase, right through to the final handover of the ready-to-go system. Hassmersheim plant FIBRO is customer-focused – world-wide. A well- developed network of sales and service points and strategic partners ensure that help is always at hand. This ensures technical advance, world-wide experience in applications and rapid availability of products. Facts and figures on FIBRO: - founded 1959 - approximately 1,100 staff - 80 representatives and service stations world-wide - branches in France, USA, Switzerland and Singapore - ISO 9001:2000 Quality Assurance and VDA 6.4 certification - a company in the LÄPPLE Group subject to alterations 8  DE  HeinrichSiggelGmbH Waldstraße 1 · 14163 Berlin Tel. 030-802 9013 · Fax 030-802 9014 siggel-gmbh@t-online.de PLZ  10000-16000  WalterRuffGmbH Postfach 45 0118 · 28295 Bremen Tel. 0421-438 78-0 · Fax 0421-438 78-22 mail@praeziruff.de · www.praeziruff.de PLZ  21000-29000,49000 AußendienstKarl-HeinzKeßler Mehlstraße 8 · 33729 Bielefeld Tel. 0521-764 43 · Fax 0521-770 75 58 Mobil 0170-564 34 15 · k.kessler@fibro.de PLZ  30000-34000,37000,38000 AußendienstJörgDyck Walter Ruff GmbH Postfach 45 0118 · 28295 Bremen Tel. 0421-438 78-0 · Fax 0421-438 78-22 Mobil 0173-925 22 43 · mail@praeziruff.de PLZ  06000,29000-31000,37000-39000 AußendienstJürgenMölling Jupiterstraße 12 · 33739 Bielefeld Tel. 05206-706 38 40 · Fax 05206-91 63 35 87 Mobil-Tel. 0170-576 00 09 j.moelling@fibro.de PLZ  32000,33000,48000,49000 SchwabGmbH Postfach 12 09 · 35323 Mücke Bergwiesenstraße 10 · 35325 Mücke Tel. 06400-80 11 · Fax 06400-80 12 PLZ  35000 Ing.BürofürAutomationDirkAhkeVDI Zum Wenzelnberg 2a · 40764 Langenfeld Tel. 02173-270 41-0 · Fax 02173-270 41-30 info@ing-buero-ahke.de PLZ  40000-48000,50000-53000,56000-59000 AußendienstLarsJahncke Flockertsberg 17 · 42653 Solingen Tel. 0212-254 34 62 · Fax 0212-254 33 90 Mobil 0170-763 7125 · l.jahncke@fibro.de PLZ  42000,44000-45000,46000,58000-59000 AußendienstHartwigHennemann Staubenthaler Höhe 79 42369 Wuppertal Tel. 0202-283 17 56 · Fax 0202-759 55 80 Mobil 0175-296 59 30 · h.hennemann@fibro.de PLZ  40000-42000,47000,50000,52000-53000 Normalien-Zentrale-SiegerlandBerndKreitzberg Postfach 1132 · 57225 Wilnsdorf Rudersdorfer Straße 18 · 57234 Wilnsdorf Tel. 02739-25 44 · Fax 02739-4116 Mobil-Tel. 0170-274 27 95 mail@kreitzberg.de · www.kreitzberg.de PLZ  51000,57000 Schlegel&VolkKG Ditmarstraße 7 · 60487 Frankfurt Tel. 069-970 6130 · Fax 069-70714 69 info@schlevo.de · www.schlevo.de PLZ  60000 AußendienstVolkerHottes Erzberger Straße 1 · 64846 Groß-Zimmern Tel. 06071-39 2119 · Fax 06071-39 =2145 Mobil 0171-957 79 89 · v.hottes@fibro.de PLZ  53000-56900,60000-66900 AußendienstHenningReiner Am Eselsberg 53 · 89075 Ulm Tel. 0731-950 80 544 · Fax 0731-950 80 545 Mobil 0151-11 71 29 75 · h.reiner@fibro.de PLZ  69000,70000-71000,73000-74000,   89100-89599 IRSWerkzeugmaschinenGmbH Max-Planck-Straße 39 · 70736 Fellbach Tel. 0711-95 57 20 · Fax 0711-95 57 230 PLZ  70000 AußendienstPeterFinkenbeiner Grüner Weg 2 · 72218 Wildberg Tel. 07054-83 07 · Fax 07054-92 89 59 Mobil 0170-564 31 78 p.finkenbeiner@fibro.de PLZ  72000,75000,77000-79000,88000-88699 AußendienstMatthiasEhrenfried Steigerwaldstraße 25 · 74172 Neckarsulm Tel. 07132-34 56 90 · Fax 07132-98 94 82 Mobil 0171-864 95 52 · m.ehrenfried@fibro.de PLZ  70000-71000,73000-74000,97000 AußendienstManfredWagner Breslauer Straße 57 · 74372 Sersheim Tel. 07042-350 86 · Fax 07042-37 48 20 Mobil 0170-563 52 30 · m.wagner@fibro.de PLZ  70000-73000,88000-89000 AußendienstMarkusRössl Johann-Strauß-Straße 16/1 · 74906 Bad Rappenau Tel.: 07264-20 64 17 · Fax 07264-20 64 18 Mobil 0160-97 25 23 93 · m.roessl@fibro.de PLZ  66800-69000,74700-76000,97800-97900,   75000-77000 HamacherGmbH Postfach 3308 · 78022 VS-Schwenningen Grabenäckerstraße 47 · 78054 VS-Schwenningen Tel. 07720-349 69 · Fax 07720-341 73 hamacher-normalien@t-online.de www.hamacher-normalien.de PLZ  78000  Jugard&KünstnerGmbH Landsberger Straße 289/l · 80687 München Tel. 089-546 15 60 · Fax 089-580 27 96 muc@jugard-kuenstner.de www.jugard-kuenstner.de PLZ  80000-87000  Jugard&KünstnerGmbH Thomas-Mann-Straße 63 · 90471 Nürnberg Tel. 0911-86 08 11 · Fax 0911-86 08 90 nbg@jugard-kuenstner.de www.jugard-kuenstner.de PLZ  90000-97000 HELDWerkzeugmaschinen Präzisionswerkzeuge GmbH Sorge 34 · 07545 Gera Tel. 0365-824 91-0 · Fax 0365-824 91 11 info@held-wzm.de · www.held-wzm.de PLZ  07500 AußendienstStefanSchumann Forstweg 44 · 07570 Weida Tel. 036603-408 02 · Fax 036603-602 37 Mobil 0170-564 51 15 · s.schumann@fibro.de PLZ  98000-99000,01000-09000  AT Rath&Co.Ges.m.b.H. Teiritzstrasse 3 · 2100 Korneuburg  Tel. +43 2262-608 · Fax +43 2262-608-60 office@rath-co.at · www.rath-co.at  AU BrudererPressesAustraliaPty.Ltd. 92 Trafalgar Street · Annandale, NSW 2038 Tel. +61-419-400-995 · Fax +61-296-864-809 Brudsyd@tpgi.com.au   EnmorTool&MachineCo.Pty.Ltd. Locked Bag 3003 · Annandale, NSW 2038 Tel. +61-249-455-898 · Fax +61-249-479-919 enmor@bigpond.com  BA Oro-Techtrgovinad.o.o. Ulica borcev 1/b · SI-2000 Maribor  Tel. +386 2-426 08 43 · Fax +386 2-426 08 44 oro-tech.trgovina@siol.net  BE SchiltzS.A. Chaussee de Gand 1034 · 1082 Bruxelles Tel. +32 2 464 4830 · Fax +32 2 464 4839 info@schiltz.be   ZVSTechniekB.V. Grotiuslaan 3 · NL-8024 XM Zwolle Tel. +31 38-4541 017 · Fax +31 38-4526 777 Mobil +31 6516 10605 rw@zvstechniek.nl · www.zvstechniek.nl   DoedijnsFluitronicsNV/SA Zoning d’Amay Allée II n° 4 · 4540 Amay Tel. +32 8 551 9696 · Fax +32 8 551 9697  BG Bavaria2002EOOD Pirotstr. 22 · 5100 Gorna Orjachoviza Tel. +359 618 64158 · Fax +359 618 64960 bavaria2002@gorna.net   FEST-04-EOOD Hotel Lovetsch, Zimmer 04 · 5500 Lovetsch Tel. + Fax +359 68 604 970 z.vasilev_fest_04@abv.bg  BR IndustecnicaEquipamentosIndustriaisLtda. R. Olívia Guedes Penteado 759 · 04766-001 S ã o Paulo Tel. +55-11-5548-4333 · Fax +55-11-5522-4400 nogueira@industecnica.com.br www.industecnica.com.br   ProdromusAutomacaoModular Av. Gen. Cavalcanti de Albuquerque, 123 Jardim Londrina - CEP 05638-010 · São Paulo - SP Tel. +55-11-3741-0897 · Fax +55-11-3746-7997 prodromus@prodromus.com.br   UltratecService Engenharia Comércio e Representações Ltda. Rua7 de Julho - CEP 04760-070 · São Paulo - SP Tel. +55-11-5523 6239 · Fax +55-11-5523 6239 ultratec@ultratecservice.com.br  CH FIBROGmbHZweigniederlassung Brüggbühlstrasse 70 · 3172 Niederwangen b. Bern Tel. +41 31-981 07 52 · Fax +41 31-981 07 53 sales.ch@fibro.com · www.fibro.com Brütsch/RüeggerWerkzeugeAG In der Luberzen 1 · 8902 Urdorf Tel. +41-44 736 63 63 · Fax +41-44 736 63 00 central@brw.ch · www.b-r.ch CL BermatS.A. Coyancura 2283, Of. 601 · Casilla 9781 · Santiago Tel. +56-2-231 88 77 · Fax +56-2-231 42 94 bermat@bermat.cl · www.bermat.cl CN ForsteppePrecisionEngineering (Shanghai) Co., Ltd.  199-3 LuXing Road · Liuzao Town Nanhui County · Shanghai, 201322 Tel. +86-21-68 16 01 69 · Fax +86-21-68 16 01 62 ayft@forsteppe.com   FGCPrecision(Guangzhou)Ltd. Flat East, 5/F., Block A3, Bei Wei Ind. Area  Western Section, GET · Guangzhou, 510730 Tel. +86-20-82 00 10 27 · Fax +86-20-82 21 75 76 c.service@forsteppe.com CY MilitosTradingLtd. K. Erotokritou & A. Demetriou Ltd. P.O.B. 27297 · 1643 Nicosia Tel. +357 2-75 12 56 · Fax +357 2-75 22 11 militos@cytanet.com.cy Vertretungen Representatives Représentations Rappresentantes Representaciones info@fibro.de·www.fibro.com Normalien   StandardParts·Élémentsnormalisés   Normalizzati·Elementosnormalizados Postfach 1120 · DE-74851 Hassmersheim August-Laepple-Weg · DE-74855 Hassmersheim Tel. +49(0)6266-73-0*· Fax +49(0)6266-73-237 Rundtische   RotaryTables·PlateauxDiviseurs   Tavolerotanti·Mesasdivisoras Postfach 1120 · DE-74183 Weinsberg Weidachstrasse 41-43 · DE-74189 Weinsberg Tel. +49(0)7134-73-0*· Fax +49(0)7134-73-120 info@fibro-gsa.de·www.fibro-gsa.com    Automation   Automation·Automatisme   Automazione·Automatismos Postfach 1120 · DE-74851 Hassmersheim August-Laepple-Weg · DE-74855 Hassmersheim Tel. +49(0)6266-73-0*· Fax +49(0)6266-73-5238 FIBROGmbH 0 · 17782 · 07/2008 · 83 subject to alterations 9 CZ Gores.r.o. Prớstavnớ 6 ã CZ-63500 Brno-Bystrc Tel. +420 5-41 59 25 18 ã Fax +420 5-41 59 25 19 gore@gore.cz ã www.gore.cz SKTechnik,spol.sr.o. Merhautova 20 ã 61300 Brno Tel. +42 0 545 429 511 ã Fax +42 0 545 211 275 info@sktechnik.cz ã www.sktechnik.cz DK EBIA/S Metalbuen 28 ã Postbox 79 ã 2750 Ballerup Tel. +45 44-97 81 11 ã Fax +45 44-68 06 26 ebi@ebi.dk ã www.ebi.dk HoffVakuumteknik Baunegồrdsvej 12 ã 2820 Gentofte Tel. +45 3964 1476 ã Fax +45 3964 1473 ndh@hoff-vakuum.dk ã www.hoff-vakuum.dk PMCTechnologyA/S Klausdalsbrovej 1 ã 2860 Sứborg Tel. +45 7021 2121 ã Fax +45 7021 2122 info@pmctechnology.dk ã www.pmctechnology.dk DZ PneumacoupeBlidaBoufarik 86 Bld. Menad Mohamed ã Boufarik, 09400 Blida Tel. +213 3-47 56 55 ã Fax +213 3-47 56 55 pneumacoupe@yahoo.fr EE CleBaltikOỷ Piirimọe Street 4 ã Tọnassilma 76401 Saku County ã Harjumaa Tel. +372 680 3532 ã Fax +372 668 8679 info@clebaltic.com ã www.clebaltic.com EG Smeco 68, Abdel Rahman El Raffei St. 11351-Heliopolis West, Cairo Tel. +20 2-620 06 71 ã Fax +20 2-620 06 74 r.metwally@tedata.net.eg ES DaunertMỏquinas-Herramientas,S.A. C/. Tirso de Molina s/n Esquina C/. Albert Einstein Polớgono Industrial Almeda 08940 Cornellỏ de Llobregat ã Barcelona Tel. +34 93-475 14 80 ã Fax +34 93-377 64 64 info@daunert.com ã www.daunert.com FI OYChristerLindholmEng.AB Santalantie 25, PL. 66 ã 10901 Hanko Tel. +358(0)207 519 600 Fax +358(0)207 519 619 info@clegroup.eu ã www.clegroup.eu FR FIBROFranceSARL 19/21, rue Jean Lolive ã 93170 Bagnolet B.P. no 129 ã 93172 Bagnolet Cedex Tộl. +33 1-43-62-18-80 ã Fax +33 1-48-59-17-47 info@fibro.fr ã www.fibro.com SecteurFrancheComtộ Codimec SA Rue des Maurapans ã ZAC de Valentin BP no. 3051 ã 25046 Bộsanỗon Cedex Tel. +33 3-81-88-83-11 ã Fax +33 3-81-88-05-45 GB BrudererUKLtd. Unit H, Cradock Road Luton ã Bedfordshire LU4 0JF Tel. +44(0)1582-563 400 Fax +44(0)1582-493 993 mail@bruderer.co.uk ã www.bruderer-presses.com W.&H.EvesLtd. Unit 5 The Aviary, Woodgate Crawley Lane, Kings Bromley Staffordshire DE13 7JF Tel. +44(0)1543-47 34 44 Fax +44(0)1543-47 21 52 t.lambon@wheves.co.uk GR Mek-MariaKoutseris&Co. Pyloy 100 ã 10441 Athen Tel. +30 210-522 05 57 ã Fax +30 210-522 12 08 mekouts@hellasnet.gr ã www.mek.com.gr HK ForsteppeAsiaLtd. Unit 207, 2/F ã Shing Chuen Industrial Building 25-27 Shing Wan Road Tai Wai, Shatin, N.T., Hong Kong Tel. +852-26 01 13 68 ã Fax +852-26 01 16 38 annie.li@forsteppe.com ã www.forsteppe.com HR Koncar-Alatid.d. Fallerovo Setaliste 22 ã 10000 Zagreb Tel. +385 1 3670 900 ã Fax +385 1 3870 932 alati@koncar-alati.hr ã www.koncar-alati.hr Oro-Techtrgovinad.o.o. Ulica borcev 1/b ã SI-2000 Maribor Tel. +386 2 426 08 43 ã Fax +386 2 426 08 44 oro-tech.trgovina@siol.net HU Rath&Co.Ges.m.b.H. Teiritzstraòe 3 ã AT-2100 Korneuburg Tel. +43 2 262-608 ã Fax +43 2 262-608-60 office@rath-co.at ã www.rath-co.at ID Pt.MultitanakaSejahtera Jl, Tanjung Duren Raya 21 A ã Jakarta 11370 Tel. +62 21-56 44 741 ã Fax +62 21-56 40 720 tanaka@cbn.net.id IL A.J.Englander1980Ltd. 13 Harechev Street ã Tel Aviv 67771 Tel. +972 3-537 36 36 ã Fax +972 3-537 33 25 info@englander.co.il ã www.englander.co.il IN NNCombinedEngineeringAgenciesPvt.Ltd. Dr. Ranji Block, First Floor 125 M. G. Road ã Secunderabad 500 003 AP Tel. +91 40-2784 42 79 ã Fax +91 40-27 84 16 52 mail@nncea.com ã www.nncea.com IN FIBROIndiaStandardPartsPvt.Ltd. Plot No. 1, Gat No. 107 at Post: Pirangut, Tal. Mulshi, Dist. Pune 411042 Tel. +91-20-66 75 05 20 ã Fax +91-20-66 75 05 24 info@fibro-india.com ã www.fibro.com AntaralSociety Sanganna Dhotre Marg, Ghaneshkhind Road Pune - 411016 Tel. +91 20-25 65 62 39 ã Fax +91 20-25 65 64 87 info@fibro-india.com ã www.fibro.com IR EximradCo. 268 Dr. Mofatah Ave. ã Tehran 15848 Tel. +98 21-88 8212 03 ã Fax +98 21-44 64 46 56 eximrad@yahoo.com IT MillutensilS.R.L. Corso Buenos Aires, 92 ã 20124 Milano Tel. +39 02-29 40 43 90 ã Fax +39 02-204 66 77 info@millutensil.com ã www.millutensil.com NCComponentiS.R.L. Via F. Raimondo, 11/B 10090 Cascine Vica-Rivoli (TO) Tel. +39 011-957 52 22 ã Fax +39 011-957 51 13 info@nccomponenti.it ã www.nccomponenti.it JP TomitaCo.Ltd. 1-18-16, Ohmorinaka, Ohta-ku ã Tokio 143 Tel. +81 3-37 65 11 88 ã Fax +81 3-37 65 17 13 bando@tomitaj.co.jp KR JinsanCommercialCo.Ltd. Rm 103, 12 Dong, Anyang Intl. Circulation Complex #555-9, Hogye-Dong, Dongan-Gu Tel. +82 31 479 3181 ã Fax +82 31 479 3180 jiscco@hotmail.com JinsungTradingCorp. Dong Wo Bldg. 303 #520-2, 2AV Choryang Dong Gu, Pusan Tel. +82 51 466 5462/3 ã Fax +82 51 466 5464 jstrade@chol.com DSKServiceCo.,Ltd. #5-3, the 3rd type of apartement factory, 36, Palryong-dong, Changwon, Kyungnam, Korea Tel. +82 55 237 2100 ã Fax +82 55 237 2101 dsk@dskservice.co.kr SeokyungEngineeringCo.,Ltd. #807-809, 1st Bldg., Lotte IT Castle, 550-1 Gasan-dong, Geumcheon-gu, Seoul 153-803 Tel. +82 2 2026-7610/-7618 ã Fax +82 2 2026-8629 www.seokyung.com LV CleBaltikOỷ Katlakalna 11C ã 1073 Riga Tel. +371 713 9991 ã Fax +371 713 9992 info@clebaltic.com ã www.clebaltic.com MA ChibaIndustrie Bd. Mohamed Bouziane Lot 96 Hay My Rachid ã Casablanca Tel. +212 22 72 69 83 ã Fax +212 22 72 69 83 chibaindustrie@menara.ma MY FIBROAsiaPte.Ltd. 121, Genting Lane, #02-02 ã Singapore 349572 Tel. +65 68 46 33 03 ã Fax +65 68 46 33 02 info@fibro-asia.com ã www.fibro.com NL JevekaB.V. Postbus 22966 ã Keienbergweg 8 1100 DL-Amsterdam ã 1101 GB Amsterdam Tel. +31 20-342 03 42 ã Fax +31 20-342 03 02 info@jeveka.com ã www.jeveka.com ZVSTechniekB.V. Grotiuslaan 3 ã 8024 XM Zwolle Tel. +31 38-4541 017 ã Fax +31 38-4526 777 Mobil +31 6516 10605 jh@zvstechniek.nl ã www.zvstechniek.nl ItemSystemsB.V. Zwarte Zee 40-42 ã 3144 DE Maassluis Tel. +31 10-593 72 60 ã Fax +31 10-592 85 38 info@item-systems.nl ã www.item-international.com NO KaspoMaskinAS Hoeggveien 66 ã 7489 Trondheim Tel. +47 73 96 96 00 ã Fax +47 73 96 96 01 kaspo@kaspo.no ã www.kaspo.no NZ APSToolingLtd. 145 Station Road ã Penrose ã 1006 Auckland 6 Tel. +64 9 579 2208 ã Fax +64 9 579 2207 info@apstools .co.nz PE Ing.E.BrammertzS.c.r.l. Av. Josộ Pardo 182 ã OF. 905 Apartado 0173 ã Miraflores, Lima 18 Tel. +51 1 445 81 78 ã Fax +51 1 445 19 31 braming@terra.com.pe PL LaskaTechnikaPrzemyslowaSp.z.o.o. Towarowa 35 ã 43-100 Tychy Tel. +48 32-326 24 50 ã Fax +48 32-326 24 51 laska@laska.com.pl ã www.laska.com.pl PT FerrometalLda. Estrada Manuel Correia Lopes Rua da Rosita, Lote 12 ã Conceiỗóo da Abúboda 2785-543 S. Domingos de Rana-Cascais Tel. +351 21-444 71 60 ã Fax +351 21-444 71 69 ferrometal@ferrometal.pt PT SeriLda. Zona Industrial da Varziela Av. Josộ Ramos Maia Lote no 3, Apartado 197 4481-911 Vila do Conde Tel. +351 252 24 85 40 ã Fax +351 252 24 85 41 seri@seri.pt RO DanielAndreiSibisan Str. Zizinului nr. 8, ap. 21 ã Brasov, 500414 Tel. +40 744 44 05 83 ã Fax +40 368 78 00 08 d.sibisan@fibro.de ã www.fibro.com RU CLEGroupRuLtd. Sofyiskaya Str. 66 ã 192289 S. Petersburg Tel. +7 812 575 1592 ã Fax +7 812 324 7388 info@cleru.ru ã www.cleru.ru SA AbdullahYahyaMunshiEst P. O. Box 20123 ã 21455 Jeddah Tel. +966 2-652 35 89 ã Fax +966 2-652 35 48 fibro.sa@gmail.com SE LidecoAB Verkstadsvọgen 4 ã 51463 Dalstorp Tel. +46 321 53 03 50 ã Fax +46 321 603 77 info@lideco.se ã www.lideco.se DankabVerktygsmaskinerAB Box 4002 ã 18104 Lidingử Larsbergsvọgen 12b ã 18139 Lidingử Tel. +46 854 44 03 40 ã Fax +46 854 44 03 45 info@dankab.se ã www.dankab.se ABSigfridStenberg Box 914, 571 29 Nọssjử Tel. +46 702 89 59 44 ã Fax +46 31 45 60 53 peter.fellsner@stenbergs.se ã http://stenberg.ntservern.se SG FIBROAsiaPte.Ltd. 121, Genting Lane, #02-02 ã Singapore 349572 Tel. +65 68 46 33 03 ã Fax +65 68 46 33 02 info@fibro-asia.com ã www.fibro.com SI Oro-Techtrgovinad.o.o. Ulica borcev 1/b ã SI-2000 Maribor Tel. +386 2 426 08 43 ã Fax +386 2 426 08 44 oro-tech.trgovina@siol.net SK Dekonas.r.o.MontagesetOutillages Buzuluckỏ 3 ã 96001 Zvolen Tel. +421 45 5401 531 ã Fax +421 45 5242 603 office@dekona.sk ã www.dekona.sk SKTechnik,spol.s.r.o. Merhautova 20 ã 61300 Brno Tel. +420 5-45 21 16 66 ã Fax +420 5-45 21 12 75 info@sktechnik.cz ã www.sktechnik.cz Gores.r.o. Prớstavnớ 6 ã CZ-63500 Brno-Bystrc Tel. +420 5-41 59 25 18 ã Fax +420 5-41 59 25 19 gore@gore.cz ã www.gore.cz TH LuBo(Thailand)Co.,Ltd. 777 Moo 15 Soi Thai Prakarn 2 Theparak Road km. 21 Bangsaothong, Samut Prakarn 10540 Tel. +66-2-317-6226 ã Fax +66-2-317-6224 sun_t@luboasia.com ã www.luboasia.com TR EnderKesiciVeTeknikãTakimlarLtd.Sti. Tersane Caddesi No. 16 ã 80000 Karakửy/Istanbul Tel. +90 212-253 26 00 ã Fax +90 212-254 57 91 enderltd@turk.net ã www.enderltd.com FikretErdoganveOrt.Koll.Sti. Otakỗilar Cad. No. 56 ã 34050 Eyỹp-Istanbul Tel. +90 212-544 87 53 ã Fax +90 212-567 99 66 tuncerdogan@fikreterdogan.com TW SunNanEnterprisesCo.Ltd. 2F, No. 7, Alley 6, Lane 235 ã Pao-Chiao Road Hsin-Tien City ã Taipei Tel. +886 2-29 17 6454 ã Fax +886 2-29 11 0398 sun-ss@umail.hinet.net US FIBROInc. 139 Harrison Ave. ã Rockford, IL 61104 P. O. B. 5924 ã Rockford, IL 61125 Tel. +1 815-229 13 00 ã Fax +1 815-229 13 03 info@fibroinc.com ã www.fibro.com YU AndrijaTesic,Dipl.Ing. Partisanska 12/a-II ã 11090 Beograd Tel. +381 11-2338 362 ã Fax +381 11-2338 362 atesic@verat.net ZA Herrmann&HerrmannPty.Ltd. 24, Shaft Road ã P. O. B. 13030 ã Knights 1413 Tel. +27 11 828 01 00 ã Fax +27 11 828 60 21 hermstools@mweb.co.za ã www.hermstools.com 0 ã 17783 ã 07/2008 ã 83 subject to alterations 10 Index A Page Absorbing washers, adjusting washers, adjusting plates G 15 Adjusting washers D 208–D 212 Air springs F 279 All-steel die sets A 25–A 61 Aluminium die sets A 36–A 41 Aluminium plates, surface ground A 35, B 5 Anaerobic metal adhesives H 10 Angled guide gibs D 178–D 185 Anti-corrosion spray lacquer FIBROLIT® RS H 13 Anti-scuff spiral F 295–F 304 Assembly of guide element – dimensional requirements and tolerances D 230–D 234 B Ball bearing guides D 52–D 61, D 77–D 81, D 94–D 95 Ball bearing inserts, with and without collar J 7 Ball bearing rails J 7 Ball cage retainers D 219 Ball cages, brass D 51, D 56–D 58, D 59 Ball cages, small dimensions D 12 Ball guide units to Daimler standard D 32 Ball guides for highest stroking speeds D 24 Ball-lock retainers, triangular, and accessories E 86–E 89 Ball-type load-bearing bolts C 14 Blade ejectors E 120–E 121 Bolt guides D 109/1 Bolt-on guide pillars D 15 Boxed clamping tool sets C 28, C 29 Brass ball cages D 51, D 56–D 58, D 59 Bushes for lifting bolts C 25 C Cage retainers D 29 Cam slide units K 4 Carbide punches E 25 Cast iron die sets A 9–A 24 Casting resin FIBROLIT® ZWO (epoxy tooling resin) H 7–H 9 Casting/tooling resins: application examples H 17–H 19 Casting/tooling resins: thinning agent H 9 Centering pin for lifting flange C 15/4 Centring inserts D 213 Centring pins to Daimler standard D 215 Centring pins to VW standard D 214 Centring units D 208–D 213 Clamping elements C 16–C 29 Collared guide bushes, sintered ferrite, carbonitrided, similar AFNOR D 82, D 91–D 93 Collared guide bushes, similar AFNOR D 94–D 96 Colour code combinations/sliding guide clearances D 10–D 11 Combination spring- and spacer units F 51–F 55, F 71–F 80 Compensation discs D 213, F 106 Compression pads FIBROFLEX® F 112/1 Compression springs F 7–F 47 Compression springs, round wire F 40–F 49 Compression springs, special rectangular crossection F 9–F 39 Concertina shrouds D 216–D 217 Controll fittings for gas springs F 307 – F 314 Conveyor belt accessories J 18–J 21 Conveyor belts, electrically controlled J 11–J 21 Conveyors, pneumatic J 23–J 26 Corrosion release spray FIBROLIT® RS H 13 Coupling spigots for die sets C 9 D Damping discs F 75 Date stamps E 129–E 130 Delimiting guides for conveyor belts J 18–J 19 Demountable flanged guide bushes, ball bearing type D 88–D90 Demountable flanged guide bushes, sintered ferrite D 82–D 84 Demountable guide pillars with collar D 31 Demountable headed guide bushes, ball bearing type D 77, D 81 Demountable headed guide bushes, sintered ferrite, carbonitrided D 66–D 70 D Page Demountable pillars AFNOR D 18 Demountable pillars, DIN 9825/ISO 9182-4 D 18 Demountable pillars, endwise bolt-on type D 17 Demountable pillars, stripper-mounted D 35–D 39 Demountable pillars, with collar to WDX D 30, D 124 Die lifting bolts C 15/2–C 15/3 Die set shanks C 8 Die set units A 40–A 42 Die set units for progression/lamination dies A 47–A 53 Die sets, all-steel A 25–A 61 Die sets, cast iron A 9–A 24 Die sets to customers specifications A 30–A 33, A 43–A 46 Disc springs DIN 2093 F 50 Dished stacking washers for FIBROFLEX® springs F 54, F 70 Dowel pins E 109, E 111 Dowel pin extractor FIBROZIPP® E 109 Dowel pins with internal extracting thread E 109 Drill bushes, headless and headed E 113 Dynamic strippers E 84 Dynamometers for gas springs F 316–F 317 E ECO LINE guide bushes, bronze D 74–D 75 ECO LINE guide bushes, bronze plated D 71–D 73 ECO LINE guide pillars D 33 Ejector pin units with gas spring F 89–F 91, F 123–F 125 Ejector pins E 116–E 123 Ejector sleeves E 124–E 125 Elastomer pads and sheets G 8, G 12 Elastomer springs F 56–F 67 Elastomer strippers FIBROFLEX® F 86–F 87 Embossing elastomers G 17–G 19 Epoxy resins FIBROLIT® ZWO and FIBROFIX® SECHS H 6–H 8 Epoxy tooling/casting resins: application examples H 17–H 19 Extractor tool FIBROZIPP® E 109 Eyebolts C 12–C 21 F FIBROELAST ® hollow round sections G 13 FIBROELAST ® round sections G 13 FIBROELAST ® sheets G 12 FIBROELAST ® tubular spring elements F 66–F 67 FIBROFIX ® SECHS tooling Epoxy resin, in cartridges H 7 FIBROFLEX ® channel sections G 9 FIBROFLEX ® compression pads F 83 FIBROFLEX ® elastomer strippers F 82 FIBROFLEX ® hollow sections G 9–G 13 FIBROFLEX ® pads and sheets G 8 FIBROFLEX ® round sections G 10 FIBROFLEX ® setting-up bumpers F 85 FIBROFLEX ® shedder inserts F 82 FIBROFLEX ® square sections G 8 FIBROFLEX ® triangular sections G 11 FIBROFLEX ® tubular spring elements F 56–F 65, F 76 FIBROLIT ® ARF marking-out blue H 13 FIBROLIT ® casting/tooling resins: application examples H 17–H 19 FIBROLIT ® LD grease and oil H 14 FIBROLIT ® MK metal adhesive H 9 FIBROLIT ® RL penetration lubricant spray H 13 FIBROLIT ® RS clear lacquer spray H 13 FIBROLIT ® TW release agent (on wax basis) H 14 FIBROLIT ® ZWO tooling/casting resin, in cans H 7 FIBROZIPP ® dowel pin extractor E 109 Fine blanking die sets A 24 Flat mushroom head screws with hexagon socket C 47 Flat tool steel B 6–B 9 Foil shims B 10 Forming Elastomer FIBROFLEX ® G 2–G 15 Forming Sections FIBROFLEX ® G 8–G 11 Four-pillar die sets, all-steel A 26–A 29a Four-pillar die sets, aluminium A 36–A 39a [...]... times natural size Spectral analysis determines whether the material is correct in terms of chemical composition Hardening – hardness testing All the process parameters in the hardening process in our own hardening shop are recorded and documented Hardness testing is used to monitor the results of the hardening process on every batch FIBRO GmbH · Standard Parts Division Postfach 1120 · D-74851 Haßmersheim... production to the completed product The test facilities themselves are also subject to stringent continuous testing Only by setting itself such stringent standards can a company support its customers long term in safety, cost-effectiveness and quality Tests during production Precision shape and contour testing equipment is used directly in production This ensures early confirmation of the quality of the product... FIBROLIT® TW (wax-acetone solution) H 14 Resin – epoxy tooling/casting resins H 7– H 9 Retainers for punches E 86 – E 102 Retaining bolts for FIBROFLEX® tubular spring elements F 76 Retaining disc with screw for demountable guide pillars D 19, D 31 Retaining plates, bronze or steel D 128–D 134 Ring blocks with position lock C 23 Roller cages D 62 Roller inserts with and without collar J8 Roller rails J8... lifters F 105–F 106 Spring plungers F 88–F 91, F 123–F 125 Spring system FIBROFLEX® F 54–F 55 Spring units with FIBROFLEX® springs F 71 Spring units with steel compression springs F 71–F 74, F 79 Square sections of FIBROFLEX® G8 Square tool steel B 6–B 9 Stacking washers for FIBROFLEX® springs F 54, F 70 Standard Parts for Mould Making Registry L Stands for conveyor belts J 21 Steel die sets, customized... 66-73-0* Fax +49 (0) 62 66-73-237 e-mail: info @fibro. de · www .fibro. com 2 · 17490 · 2002 · 1 △ Final tests For precision at micro level if certain basic requirements have to be met It goes without saying that the temperature of the measuring room at FIBRO is kept at 20ºC Here the fine precision FIBRO products are measured after production before being released to the customer ... compression springs F 81 – F 83 Round sections of FIBROELAST® G 13 Round sections of FIBROFLEX® G 10 S Screws C 21 – C 27 Screw clamps D 222–D 224 Securing flanges D 224 Set screws for compression spring adjustment F 81 F 85 Setting-up bumpers FIBROFLEX® Shanks C8 Shedder inserts FIBROFLEX® F 112 Sheets of FIBROELAST® G 12 Sheets and pads of FIBROFLEX® Elastomer G8 Shock absorbing washers FIBROFLEX® G... quality of the product The shape testing equipment tests for qualities such as roundness, concentricity, straightness and rectangularity FIBRO state of the art technology provides 3D visualisation of concentricity, coaxiality and cylindricity Materials testing - raw materials to specification The FIBRO laboratories carry out microscopic investigation of the raw materials, including enlargement to 2,500... L Liner bushes for dowel pins Load/force diagrams for elastomer springs Locating Bolts for FIBROFLEX® and FIBROELAST® round springs Locking adhesive for screws, nuts etc Long-term lubrication for sintered metal Loss prevention for conveyor belts Lubricant Page E 110 F 54 – F 67 F 84 H 10 H 14 J 19 H 14 M Manifold-System Marking-out spray FIBROLIT® ARF Matrixes – FIBROFLEX® Matrixes Metal adhesive FIBROLIT®... pads Thrust pins for quill bushes Thrust washers Tooling/casting resin – in cans and cartridges Tooling/casting resins: application examples Tooling pallet die sets Tool steel, flat and square Triangular sections of FIBROFLEX® Tubular spring elements FIBROFLEX® Two-pillar die sets, all-steel Two-pillar die sets, cast iron Two-pillar die sets, aluminium Page D 186 C 23 H9 F 93–F 979 F 95 F 286–F 287... to alterations FIBRO 2 · 17489 · 2002 · 1 △ 2000.500.008 GB 07/2002 Experience and expertise you can rely on FIBRO Quality Assurance FIBRO Experience and expertise you can rely on FIBRO Quality Assurance FIBRO is renowned for its quality world-wide This high quality is achieved through our dedication and commitment to Quality Assurance FIBRO testing starts on the raw material and continues right through . Centering pin for lifting flange C 15/4 Centring inserts D 213 Centring pins to Daimler standard D 215 Centring pins to VW standard D 214 Centring units. palletising work pieces, unloading injection moulding dies, PCB feeders, press linking, palletising, stacking, loading and unloading, transporting and flexible