Tài liệu Sensor Products P4 doc

2 203 0
Tài liệu Sensor Products P4 doc

Đang tải... (xem toàn văn)

Thông tin tài liệu

Measurement & Inspection Applications More information online at bannerengineering.com/applications 41 Low Supply Signaling Objective: To give a means for signaling that a supply of parts needs to be replenished. Small Object Detection Objective: To accurately detect flat objects passing on a conveyor. Small Part Counting Objective: To count parts as small as 5.6 mm in diameter. Height Measurement Objective: To verify that a stack of boards has the correct number of boards, by measuring the stack’s height. Ink Level Objective: To monitor the ink level in a printer tray. Web Thickness Objective: To measure the thickness of webbing. Empty Rack Verification Objective: To verify that all glass hard disks are removed from the holding rack after the disks are missed. Hot Part Detection Objective: To make sure that a waffle maker is hot before batter is poured into it. Hot Glue Detection Objective: To identify food packages missing hot sealing glue, before the flaps are closed. Part-Picking Indication Objective: To indicate to an assembler the part to pick and to alert the assembler to an error. Part-Picking Indication in a Confined Area Objective: To indicate the part-picking sequence and enable the assembler to indicate each completed task without hand stress. Long-Range Assembly Sequence Indication Objective: To provide pick-to-light signaling across a wide bin. Part-Picking Indication Objective: To signal to the assembler the next part to pick in a sequence and to trigger the next light in the sequence. See page 304 See page 304 See page 308See page 304 See page 328 See page 328 See page 332 See page 336 See page 336 See page 332 See page 342 See page 346See page 339 Vehicle Separation Objective: To detect vehicle separation in an Automated Vehicle Classification (AVC) system. See page 312 Edge Monitoring Objective: To track the edge of a web as it rolls, to make sure it stays aligned. See page 312 Small Part Detection Objective: To detect extremely small parts as they fall through a web of sensing beams. See page 332 Applications More information online at bannerengineering.com/applications42

Ngày đăng: 25/01/2014, 15:20

Tài liệu cùng người dùng

  • Đang cập nhật ...

Tài liệu liên quan