0
  1. Trang chủ >
  2. Công Nghệ Thông Tin >
  3. Quản trị mạng >

Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know doc

Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know docx

Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know docx

... Terminations 87. Splicing vs. Field Connectors 98. Slack Storage 10 9. Fiber Density 11 10. Planning for Future Growth 12 Fiber for Broadcast and Entertainment ProfessionalsTop Ten Things to Know Top ... include:• Bend radius: At turns in fiber runs, maintain a 1.5-inchbend radius. Tighter bends may cause micro-bendingof individual fibers that allow light to escape the signalpath, resulting ... elimination of wastedmaterial and time offered by using factory-terminated fiber optic cable make a little re-orientation in engineering mindset and practice more than worthwhile.Top Ten Things...
  • 12
  • 380
  • 0
Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know doc

Tài liệu ADC KRONE - Guide - Fiber in Broacast & Production Facility - 10 thing should know doc

... Terminations 87. Splicing vs. Field Connectors 98. Slack Storage 10 9. Fiber Density 11 10. Planning for Future Growth 12 Fiber for Broadcast and Entertainment ProfessionalsTop Ten Things to Know Top ... include:• Bend radius: At turns in fiber runs, maintain a 1.5-inchbend radius. Tighter bends may cause micro-bendingof individual fibers that allow light to escape the signalpath, resulting ... elimination of wastedmaterial and time offered by using factory-terminated fiber optic cable make a little re-orientation in engineering mindset and practice more than worthwhile.Top Ten Things...
  • 12
  • 274
  • 0
Tài liệu ADC KRONE - Guide - Fiber in Broadcast & Production Facilities pptx

Tài liệu ADC KRONE - Guide - Fiber in Broadcast & Production Facilities pptx

... Terminations 87. Splicing vs. Field Connectors 98. Slack Storage 10 9. Fiber Density 11 10. Planning for Future Growth 12 Fiber for Broadcast and Entertainment ProfessionalsTop Ten Things to Know Top ... include:• Bend radius: At turns in fiber runs, maintain a 1.5-inchbend radius. Tighter bends may cause micro-bendingof individual fibers that allow light to escape the signalpath, resulting ... elimination of wastedmaterial and time offered by using factory-terminated fiber optic cable make a little re-orientation in engineering mindset and practice more than worthwhile.Top Ten Things...
  • 12
  • 426
  • 0
Tài liệu ADC KRONE - Guide - EDF - Centralized Cross-Connection for managing Ethernet Data Services doc

Tài liệu ADC KRONE - Guide - EDF - Centralized Cross-Connection for managing Ethernet Data Services doc

... Frame2www .adc. com • + 1-9 5 2-9 3 8-8 080 • 1-8 0 0-3 6 6-3 891Benefits• Lower operating costs. As compared to direct connect or interconnect designs, the EDF cross-connect reduces the time it takes for adding ... rapid changes to the network. Turning-up new service isaccomplished by plugging in a patch cord instead of the labor-intensive task of making multiple hard-wiredcable connections. As a result, ... Distribution Frame3www .adc. com • + 1-9 5 2-9 3 8-8 080 • 1-8 0 0-3 6 6-3 891Permanent Equipment Cables, providing permanent connections between the EDF and distributionpanels in each Active Network Element...
  • 4
  • 453
  • 1
Tài liệu ADC KRONE - Guide - FO - Laser Optimized Fiber better in Price, Bandwidth, and Distance ppt

Tài liệu ADC KRONE - Guide - FO - Laser Optimized Fiber better in Price, Bandwidth, and Distance ppt

... 802.3z 100 0BASE-SXGigabit Link @ 1310nm Laser IEEE 802.3z 100 0BASE-LX 10 Gigabit Link @ 850nm Laser IEEE 802.3ae 10GBASE-SR 10 Gigabit Link @ 1 310 CWDM Laser IEEE 802.3ae 10GBASE-LX4*62.5/125 ... now 10 Gigabit. The rapid growth of Internet use and bandwidth-intensive applications combined with routine transmission of large files is driving the need for 10 Gigabit Ethernet (10GbE) in ... continue to be layered onto the network, laser-optimized 50µm fiber will be key to maximizing your investment in all LAN applications. Laser-optimized 50µm multimode fiber is ideal for use in...
  • 4
  • 399
  • 0
Tài liệu ADC KRONE - Guide - FO - Field Performance Testing of Fiber Link - ISO 11801 ppt

Tài liệu ADC KRONE - Guide - FO - Field Performance Testing of Fiber Link - ISO 11801 ppt

... & Tail Cords. Inter-building Campus Cabling Use LSPM 2 x wavelengths, both in 2 x directions, AND ALSO Use OTDR For Links less than 300m, It is not an ADC KRONE requirement. For Links ... Pacific) OF Testing ADC KRONE Requirements V7_1&3T Dr2Page 10 of 12 27 OTDR Testing, Unacceptable Results Due To Ghosting “Ghosting” is the persence of multiple peaks in an OTDR trace ... Cabling Under TestL1 OF Testing ADC KRONE Requirements V7_1&3T Dr2Page 7 of 12 21 Reference Setting on LSPM Using the 1-Test Cord Method (Step 1) For MMF, apply a Mandrel Wrap in the...
  • 12
  • 560
  • 0
Tài liệu ADC KRONE - Guide - FO - The challenge in using APC connector ppt

Tài liệu ADC KRONE - Guide - FO - The challenge in using APC connector ppt

... optical fiber) . We can find z by using the law of sines:c=zC=2αA=9 0- α+θ()b =y + 2tanαx 0c = sin(A)bsin(C)cosα12 cos α1(Using the imaginary lines in Figure 4 to find the ... the pistoning of the fiber within the ferrule. But if we reduce the minimum fiber height requirement, we can easily increase theapex offset a small amount and maintain physical contact in temperatures ... Challenges of Apex Fiber optic connectors provide a low loss means of connecting optical circuits. Low loss is achieved byminimizing the lateral offset between optical fibers and by maintaining physical...
  • 6
  • 438
  • 0
Tài liệu ADC KRONE - Guide - FO - The Key to Unlocking Fiber competitive advantages doc

Tài liệu ADC KRONE - Guide - FO - The Key to Unlocking Fiber competitive advantages doc

... 24 -fiber, 72 -fiber , 96 -fiber and 144 -fiber cables. Trying to match these cables up tosplice panels based on a 144 -fiber capacity can be difficult and generally involves splitting the sub-units ... the termination panels used in the ODF. In large fiber count applications, with more than 432 incoming OSP fibers, splicing in a remote location can increase thetermination density within the ... splicing and terminations located in central office.(3) frames, total capacity: 108 0 termination capacity.Figure 16. On-frame splicing ODF layoutPage 16Off-Frame SplicingOff-frame splicing involves...
  • 22
  • 491
  • 0

Xem thêm

Từ khóa: Báo cáo thực tập tại nhà thuốc tại Thành phố Hồ Chí Minh năm 2018Nghiên cứu sự biến đổi một số cytokin ở bệnh nhân xơ cứng bì hệ thốngBáo cáo quy trình mua hàng CT CP Công Nghệ NPVchuyên đề điện xoay chiều theo dạngNghiên cứu tổ hợp chất chỉ điểm sinh học vWF, VCAM 1, MCP 1, d dimer trong chẩn đoán và tiên lượng nhồi máu não cấpđề thi thử THPTQG 2019 toán THPT chuyên thái bình lần 2 có lời giảiBiện pháp quản lý hoạt động dạy hát xoan trong trường trung học cơ sở huyện lâm thao, phú thọGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitĐỒ ÁN NGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWANĐỒ ÁN NGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWANPhát hiện xâm nhập dựa trên thuật toán k meansNghiên cứu về mô hình thống kê học sâu và ứng dụng trong nhận dạng chữ viết tay hạn chếTìm hiểu công cụ đánh giá hệ thống đảm bảo an toàn hệ thống thông tinThiết kế và chế tạo mô hình biến tần (inverter) cho máy điều hòa không khíSở hữu ruộng đất và kinh tế nông nghiệp châu ôn (lạng sơn) nửa đầu thế kỷ XIXGiáo án Sinh học 11 bài 15: Tiêu hóa ở động vậtNguyên tắc phân hóa trách nhiệm hình sự đối với người dưới 18 tuổi phạm tội trong pháp luật hình sự Việt Nam (Luận văn thạc sĩ)Giáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtHIỆU QUẢ CỦA MÔ HÌNH XỬ LÝ BÙN HOẠT TÍNH BẰNG KIỀMMÔN TRUYỀN THÔNG MARKETING TÍCH HỢP