Technical english for automotive engineering chapter 4 suspension

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 4: MANUAL OPERATION pot

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 4: MANUAL OPERATION pot
... Read the instructions for changing a tyre; then put them in the correct order Practice Read the instructions for the dynamo belt on the left; then complete the instructions for the alternator belt ... working volume + clearance volume) by the clearance volume Therefore, for the engine in figure 4.2: ( _ + ) / _ = The engine therefore has a _ : _ compression ratio ... Presentation Select the correct instructions for the actions in Figure 4.1: For example: A = Turn the jack handle anticlockwise to lower the car Turn the gear...
  • 12
  • 315
  • 5

English for Tourism and Hospitality 4

English for Tourism and Hospitality 4
... there a kettle? And are there cups? Are there cups for tea? Yes, there’s a kettle And there are cups Is that OK? OK! Answers: 1) There’s (some) tea and coffee in the cupboard 2) There are ten guests ... We’re just waiting for someone Excuse me I need to book a taxi f Both of the buses will be here in 10 minutes The Chant Practise saying this chant out loud Is there a kettle? And are there cups? ... _ car park / at / rear / hotel _ Matching – Both and just Match the first part of the conversation with the correct response Practise saying them...
  • 2
  • 439
  • 16

English for Tourism and Hospitality 4

English for Tourism and Hospitality 4
... a reservation for three nights Mona White - I called last week Leo: One moment please, Ms White… Yes, that was for two single rooms, wasn't it? I've reserved rooms 40 2 and 40 3 for you Mona: Are ... kettle? And are there cups? Are there cups for tea? Yes, there's a kettle And there are cups Is that OK? OK! Is there a kettle? And are there cups? Are there cups for tea? Yes, there's a kettle And ... there is (Dạ, có chứ.) Mona: And a kettle and tea? (Thế có ấm nước trà không?) Leo: Yes, there are tea-making facilities in every room (Phòng có đồ pha trà.) Mona: And is there an iron? (Và có...
  • 7
  • 170
  • 0

Questions for revision- English for mechanical engineering

Questions for revision- English for mechanical engineering
... shape B for shape C for shaping D both A & C 37 Levers.according to the relative positions of the load, the effort and the fulcrum A classify B is classified C are classified D classified 38 A force ... motion in engineering, they are rotary and .motion A linear B straight C reciprocating D circular 103A twisting force that produces torsion or rotary motion is A compressive force B tensile force ... B electronic system C electromechanical D mechanical system system 109 Friction is sometimes a helpit is a hindrance A but B so C therefore D and 110 Oil is used for bearing it is self-lubricating...
  • 7
  • 685
  • 12

Tài liệu Final report "The Situation of Learning English for Electrical Engineering of D06k52 Students in Faculty of Foreign Language, Ha Noi University of Technology" docx

Tài liệu Final report
... Ngoc D06K52 Faculty of Foreign Language Ha Noi University of Technology The Situation of Learning English for Electrical Engineering of D06k52 Students in Faculty of Foreign Language, Ha Noi University ... Bich Ngoc D06K52 Faculty of Foreign Language Ha Noi University of Technology Introduction This report discusses the situation of learning EEE of d06, k52 students in FOFL, HUT Before studying this ... Bich Ngoc D06K52 Faculty of Foreign Language Ha Noi University of Technology Results The course requirements in textbook of English for Electrical Engineering: Before the lesson - Students are...
  • 7
  • 301
  • 1

Tài liệu English for Business Management - Chapter I: Economics doc

Tài liệu English for Business Management - Chapter I: Economics doc
... Economics Suffixes Nouns -ance -or -er -ist -ness -ism -ence verbs -ize -ate -ify -en adjectives -able -ible -less -ic -cal -ish -ive Adverbs -ly Exercise Form new words from the words listed below ... example, -ly added to the adjective quick gives the adverb quickly Let now consider some suffixes and their usual meanings 10 English for Business Management Economics Suffixes Nouns -ance -or -er -ist ... restrict business mergers 35 English for Business Management Economics Exercise Find single words in the text for which these words could be substituted many ( 1-2 ) separate out ( 5-6 ) frontier ( 9-1 0)...
  • 45
  • 364
  • 3

Tài liệu Questions for revision - English for mechanical engineering ppt

Tài liệu Questions for revision - English for mechanical engineering ppt
... electronic system C electromechanical D mechanical system system 109 Friction is sometimes a helpit is a hindrance A but B so C therefore D and 110 Oil is used for bearing it is self-lubricating A but ... motion in engineering, they are rotary and .motion A linear B straight C reciprocating D circular 103A twisting force that produces torsion or rotary motion is A compressive force B tensile force ... shape B for shape C for shaping D both A & C 37 Levers.according to the relative positions of the load, the effort and the fulcrum A classify B is classified C are classified D classified 38 A force...
  • 11
  • 181
  • 0

Tài liệu English for students of Physics_Unit 4 doc

Tài liệu English for students of Physics_Unit 4 doc
... …………… .of light from any sharp spectral line The standard meter in France has been …………… in terms of the number of wavelengths of light of a certain …………….line Exercise 3: Decide whether each of ... the time; Note that, as for before and after, they can not only function as conjunctions of time but also as prepositions of time: a He jumped to the conclusion before any of his classmates b He ... development of federal standards for automatic data processing techniques, for computer equipment, and for computer languages 10 ……………some atoms combine to form solids, one or more electrons are often...
  • 12
  • 275
  • 2

ENGLISH FOR AUTOMOBILE ENGINEERING- UNIT 1: IN A WORKSHOP pot

ENGLISH FOR AUTOMOBILE ENGINEERING- UNIT 1: IN A WORKSHOP pot
... does GRAMMAR OVERVIEW There + be / have, have got Example: There are two cars in parking lot Tom has three cars Machine V + ing Example: Lapping, Milling, drilling Terminologies Planning machine ... ['pleiniη mə'∫i:n] Milling machine ['miliη] Lathe ≈ turning lathe [‘tɜ:nɪŋ leið] Drilling machine ['driliη] Grinding machine ['graindiη] Lapping machine ['læpiη] Boring machine ['bɔ:riη] Terminologies ... 1.3 and complete the text: Cars have wheels and tyres; bikes also and tyres have wheels Planes have wings but bikes, cars and locomotive not (have wings) Cars, locomotives and planes have engines...
  • 10
  • 308
  • 8

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 2 VEHICLE COMPONENTS doc

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 2 VEHICLE COMPONENTS doc
... UNIVERSITY OF INDUSTRY Rear window 18 Side window 19 Aerial 17 20 Wing mirror 16 Badge Number plate 21 27 22 Door handle 26 Door 23 25 Rear light 24 Boot Rear bumper Exhaust pipe HOCHIMINH UNIVERSITY ... Bonnet Sunroof Petrol cap/flap 15 Logo Wheel trim 14 Headlight Front bumper 10 Indicator Wing 11 13 12 Wheel arch Sill HOCHIMINH UNIVERSITY OF INDUSTRY Tire Practice 1b Aerial ['eəriəl] Badge [bædʒ] ... drive/differential HOCHIMINH UNIVERSITY OF INDUSTRY 11 Practice HOCHIMINH UNIVERSITY OF INDUSTRY 12 ...
  • 12
  • 400
  • 11

ENGLISH FOR AUTOMOBILE ENGINEERING -UNIT 3 ROTARY SYSTEM docx

ENGLISH FOR AUTOMOBILE ENGINEERING -UNIT 3 ROTARY SYSTEM docx
... than A; the speed of B is therefore Slower than A HOCHIMINH UNIVERSITY OF INDUSTRY Practice Choose a, b, c, d or e to complete the sentences Use Figure 3. 2 and Table 3. 1 below: a) The ratio of the ... Table 3. 1 below: a) The ratio of the number of teeth is b the size ratio e b) The two gear system in Figure 3. 2 are c c) A:C and D:F are d) The movement of A is e) The speed of B is d a the movement ... Figures 2.5 and 2.6 HOCHIMINH UNIVERSITY OF INDUSTRY In pulley systems, the diameter of the pulleys is very important In pulley system in Figure 2.5, the diameter of the top pulley is 20 cm and...
  • 12
  • 359
  • 5

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 7 ppt

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 7 ppt
... ENGLISH FOR AUTOMOBILE ENGINEERING UNIT FINDING A FAULT IN A CAR MAY 14, 2011 HOCHIMINH UNIVERSITY OF INDUSTRY Presentation Read the text and match these pictures in Figure 7. 1 with ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ HOCHIMINH UNIVERSITY OF INDUSTRY Practice Use Table 7. 2 and Figure 7. 3 to complete the text: Fault Reasons Excessive Choked air cleaner fuel Leaking carburetor ... and clean Check and tighten all screws HOCHIMINH UNIVERSITY OF INDUSTRY Practice Use Table 7. 2 and Figure 7. 3 to complete the text: Excessive fuel consumption can be caused by one of the following...
  • 13
  • 247
  • 9

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 8 doc

ENGLISH FOR AUTOMOBILE ENGINEERING-UNIT 8 doc
... ENGLISH FOR AUTOMOBILE ENGINEERING UNIT www.fme.edu.vn HOCHIMINH UNIVERSITY OF INDUSTRY FACUTY OF MECHANICAL ENGINERRING INTRODUCTION The automobile industry is a fast ... later 18th century, when the first automobile was put on road, this industry has developed tremendously Now there are thousands of factories all over the world manufacturing numerous type of automobile ... similar equipments The automobile industry is a developing and demanding industry which does not find its end or saturation point There is a great demand for varied types of automobile products,...
  • 22
  • 226
  • 3

Xem thêm

Từ khóa: Basic kanji book 130 đề thi thử thpt quốc gia môn tiếng anh năm 2017Bài giảng truyền động điện Nguyễn Xuân Huy 2016 (autosaved)Nghiên cứu khả năng ghi nhớ và học lực của học sinh trường trung học phổ thông hồng thái hà nộiNghiên cứu sự vận tải và phân phối thuốc curcumin của màng bacterial cellulose lên men từ nước dừa già định hướng sử dụng qua da15 đề thi tiếng anh vào lớp 10 có đáp ánNâng cao chất lượng cho vay doanh nghiệp nhỏ và vừa tại ngân hàng nông nghiệp và phát triển nông nghiệp Việt Nam - Chi nhánh thành phố Thanh HóaThe teachings on speace and harmony of the 14th dalai lama and selected peace advocatesHoàn thiện đề án xác định VTVL đối với cán bộ phòng, ban ở trường đại học hùng vương tỉnh phú thọQuản lý thuế thu nhập cá nhân trên địa bàn thị xã Sông Công tỉnh Thái Nguyên (LV thạc sĩ))Nâng cao chất lượng cho vay đối với hộ sản xuất tại chi nhánh NHNo & PTNT huyện Vũ ThưNâng cao chất lượng cho vay tiêu dùng của ngân hàng thương mại Cổ phần Dầu khí Toàn Cầu chi nhánh Thăng LongNâng cao chất lượng cho vay trung và dài hạn đối với doanh nghiệp tại ngân hàng thương mại cổ phần xuất nhập khẩu Việt nam - chi nhánh Ba ĐìnhQuản lý hoạt động liên kết đào tạo của trường cao đẳng kỹ thuật với doanh nghiệp (tt)Nghiên cứu biến tính diatomit phú yên ứng dụng trong hấp phụ và xúc tác (tt)Nghiên cứu biến tính diatomit phú yên ứng dụng trong hấp phụ và xúc tácMột số giải pháp nhằm nâng cao hiệu quả sử dụng vốn lưu động tại Công ty Cổ phần thương mại Sơn - Dầu.PDFMột số giải pháp nhằm nâng cao hiệu quả sử dụng vốn tại Công ty Cổ phần thực phẩm Hữu NghịMột số giải pháp tạo động lực cho nhân viên ngân hàng thương mại Cổ phần Bưu điện Liên Việt - Phòng Giao dịch lớn Hà ĐôngMức độ chấp nhận rủi ro của hệ thống ngân hàng thương mại Việt Nam
Nạp tiền Tải lên
Đăng ký
Đăng nhập