0
  1. Trang chủ >
  2. Cao đẳng - Đại học >
  3. Kỹ thuật - Công nghệ >

DEVELOPMENT OF AN INTEGRATED SYSTEM FOR HUMAN SPINE DEFORMITY MEASUREMENT

DEVELOPMENT OF AN INTEGRATED SYSTEM FOR HUMAN SPINE DEFORMITY MEASUREMENT

DEVELOPMENT OF AN INTEGRATED SYSTEM FOR HUMAN SPINE DEFORMITY MEASUREMENT

... scoliosis measurement The objective of this research is to build a non-contact and radiation-free system to evaluate and assess the severity of human spinal deformity An innovative and integrative system ... Components of the spinal measurement system 59 Figure 3.2 The architecture design for the spinal deformity measurement system Figure 3.3 61 Design illustration for the spinal deformity measurement system ... radiation-free system for human spine deformity measurement and assessment based on stereo vision technology and Stewart platform (SP) manipulation to precisely evaluate a patient’s trunk topology, and...
  • 221
  • 440
  • 0
Development of an integrated bake chill system for microlithography

Development of an integrated bake chill system for microlithography

... thank Professor Arun Sadashiv Mujumdar for many useful discussion on my project In addition, special thanks goes to Dr Lou Jing and Mr Zhang BaiLi from Institute of High Performance Computing for ... increasing rate of the capital cost is faster than that of revenues Currently, the cost of setting up a plant for chip manufacturing is nearly $10 billion, and more than 60% of this cost can be attributed ... that of soft bake: the evaporation of solvents to harden the resist and to achieve good adhesion of the resist to the wafer surface [9] As in the soft bake, the temperature and time ranges for...
  • 116
  • 290
  • 0
Development of an integrated treatment system for ink effluent

Development of an integrated treatment system for ink effluent

... complexity in ink effluent The high organic contents and high strength colour ink effluent are the characteristics for the ink- jet ink effluent in majority of the cases 2.2 Biodegradability of Ink Effluents ... 2.1 Inkjet Ink Effluents 2.1.1 Inkjet Technologies 2.1.2 Drop-on-demand Inkjet Printing 2.1.3 Components of Inkjet Ink 10 2.2 Biodegradability of Ink Effluents 11 2.3 Conventional Fenton Treatment ... volume of ink- jet printer production, there is a continuous demand to search for a technically and economically optimal solution for the treatment of ink- jet ink effluents Currently, ink effluents...
  • 138
  • 419
  • 0
báo cáo hóa học:

báo cáo hóa học:" Cross-cultural development of an item list for computer-adaptive testing of fatigue in oncological patients" potx

... operationalisation, pre -testing and field testing) resulting in an item bank for CAT A major focus of the EORTC strategy is guaranteeing cross-cultural applicability of the CAT from the very beginning The very ... comprising 44 items for field testing within phase IV is shown in Table Discussion The main objective of this study was to develop an item bank for computer-adaptive testing of the fatigue concept ... family activities exhausting?”) Thus, the final list for pre -testing in patients comprised 44 items (25 items for general fatigue and 19 items for physical fatigue) For a summary see Figure 1:...
  • 10
  • 461
  • 0
Báo cáo khoa học:

Báo cáo khoa học: "Stereotactic body radiotherapy for stage I lung cancer and small lung metastasis: evaluation of an immobilization system for suppression of respiratory tumor movement and preliminary results" ppsx

... data CIH, KO and SA participated in acquisition and analysis of data HO participated in the design of the study and helped to perform the statistical analysis CS participated in analysis and interpretation ... of commercially available immobilization devices, and is designed to readily fix patients body and to suppress respiratory movement In this study, we measured motion of lung tumors, and examined ... B, C and D in the craniocaudal and right-to-left directions in the upper and Amplitude of tumor movement under conditions A, B, C and D in the craniocaudal and right-to-left directions in the...
  • 10
  • 348
  • 0
báo cáo khoa học:

báo cáo khoa học:" Cross-cultural development of an item list for computer-adaptive testing of fatigue in oncological patients" doc

... operationalisation, pre -testing and field testing) resulting in an item bank for CAT A major focus of the EORTC strategy is guaranteeing cross-cultural applicability of the CAT from the very beginning The very ... comprising 44 items for field testing within phase IV is shown in Table Discussion The main objective of this study was to develop an item bank for computer-adaptive testing of the fatigue concept ... family activities exhausting?”) Thus, the final list for pre -testing in patients comprised 44 items (25 items for general fatigue and 19 items for physical fatigue) For a summary see Figure 1:...
  • 10
  • 453
  • 0
Báo cáo y học:

Báo cáo y học: "Evaluation of an ambulatory system for the quantification of cough frequency in patients with chronic obstructive pulmonary disease" ppsx

... decubitis; Cough = cough output from algorithm The shaded bar contains the cough event Cough is indicated by a single solid line at the end of the breath that contains the cough Note the change in the ... breathing frequency (median Fb = 21 br·min-1) The system was highly accurate in identifying cough as a respiratory event during night or day Accuracy during the night was 99.4%, while accuracy during ... evaluation of antitussive therapies The availability of a valid, robust ambulatory tool for quantifying cough will enable the determination of the minimal required reduction in cough to maximally improve...
  • 7
  • 315
  • 0
Development of an integrated, programmable, non emissive textile display material

Development of an integrated, programmable, non emissive textile display material

... Presentation of the foundation technologies for a non- emissive textile display system and its usage • In depth technical analysis of the display system • Presentation of a wide range of prototypes and ... the textile to display images and animations on the textile This thesis explores the detailed development of a non- light -emissive displays using heat sensitive thermochromic inks In non- light -emissive ... the development of the non- emissive textile display 1.2 Research Objective Our main research objective is “Identifying the key development technologies for a non- emissive textile display material...
  • 213
  • 295
  • 0
Development of an adaptable model for distributed collaborative computer aided design

Development of an adaptable model for distributed collaborative computer aided design

... principles of distributed collaborative computer aided design (DCCAD), gives an overview of collaborative design fundamentals including collaboration design mechanisms and main tasks of collaborative design, ... the data location, modeling kernel and functionalities of collaborative design, the tasks can be centralized or distributed For the participants of collaborative design, it can be intra-enterprise ... issues for the research are platform-independent adaptable structure, distributed design management and co-ordination, design process representation, collaborative design communication and design...
  • 91
  • 481
  • 0
Tài liệu Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces pptx

Tài liệu Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces pptx

... method, which can transmit the view of forks’ environment in term of force feedback information, and we named it as observe-by-wire system The essential components of an OBW system are distance sensors ... Rossetter, Ian A Coe, J Christian Gerdes “Handwheel Force Feedback for Lanekeeping Assistance: Combined Dynamics and Stability,” American Society of Mechanical Engineers - Journal of Dynamic Systems, ... experiments are conducted by using this simulation and the haptic interface Fig The haptic interface is developed for the OBW system A fork system and working environment and control algorithm are...
  • 6
  • 455
  • 0
Tài liệu Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces docx

Tài liệu Development of an Observe-By-Wire System for Forklifts Using Haptic Interfaces docx

... method, which can transmit the view of forks’ environment in term of force feedback information, and we named it as observe-by-wire system The essential components of an OBW system are distance sensors ... Rossetter, Ian A Coe, J Christian Gerdes “Handwheel Force Feedback for Lanekeeping Assistance: Combined Dynamics and Stability,” American Society of Mechanical Engineers - Journal of Dynamic Systems, ... experiments are conducted by using this simulation and the haptic interface Fig The haptic interface is developed for the OBW system A fork system and working environment and control algorithm are...
  • 6
  • 507
  • 0
Tài liệu Development of an Observe-By-Wire System for Forklifts pptx

Tài liệu Development of an Observe-By-Wire System for Forklifts pptx

... method, which can transmit the view of forks’ environment in term of force feedback information, and we named it as observe-by-wire system The essential components of an OBW system are distance sensors ... Rossetter, Ian A Coe, J Christian Gerdes “Handwheel Force Feedback for Lanekeeping Assistance: Combined Dynamics and Stability,” American Society of Mechanical Engineers - Journal of Dynamic Systems, ... motor distance information measured from an array of four sensors which are mounted on the left fork G : is the constant gain used to change the feedback force magnitude The need of constant gain...
  • 6
  • 472
  • 0
báo cáo hóa học:

báo cáo hóa học:" Development of an in vitro three dimensional loading-measurement system for long bone fixation under multiple loading conditions: a technical description" potx

... ultimate goal was to use this loading- measurement system to measure and compare the relative 3D biomechanical characteristics of intact and two Association for the Study of Internal Fixation (ASIF) ... compliment application of ASIF devices along the distal aspect of the lateral and cranial (anterior) radius surfaces with at least a 0.5 cm distance from potting material, and to have sufficient bone- potting ... to a maximum at the central load application point Panjabi et al [16] reported that cortical bone longitudinal modulus of elasticity increases with increase in strain rate by a factor of 1.5 for...
  • 11
  • 482
  • 0
Báo cáo hóa học:

Báo cáo hóa học: " Combination of Polymer Technology and Carbon Nanotube Array for the Development of an Effective Drug Delivery System at Cellular Leve" pptx

... concentration on the surface of the film and finally ks is the desorption rate constant Substituting known values and by fitting the experimental data with the mathematical model of Eq 1, the h value ... bulk, C10 is the concentration inside the gel, S and V1 are, respectively, the surface and the volume of film, V2 is the volume of the bulk, h is the massive exchange coefficient, Cs0 is the protein ... illustration of the proposed CNT-based system Nanoscale Res Lett (2009) 4:668–673 671 Fig Bare (a), and SiO2coated (b) CNT array (samples dipped in water and dried in air before the imaging) 120 % of...
  • 6
  • 485
  • 0

Xem thêm

Từ khóa: unit 316 support the design and development of an information systemdesign and development of an automatic speech recognition system for urduthe discovery that micrornas mirnas are synthesized as hairpincontaining precursors and share many features has stimulated the development of several computational approaches for identifying new mirna genes in various animal speciesan integrated framework for semantican integrated architecture for shallowan interface system for recordingBáo cáo quy trình mua hàng CT CP Công Nghệ NPVNghiên cứu tổ chức pha chế, đánh giá chất lượng thuốc tiêm truyền trong điều kiện dã ngoạiMột số giải pháp nâng cao chất lượng streaming thích ứng video trên nền giao thức HTTPđề thi thử THPTQG 2019 toán THPT chuyên thái bình lần 2 có lời giảiGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitĐỒ ÁN NGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWANNGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWAN SLIDEPhối hợp giữa phòng văn hóa và thông tin với phòng giáo dục và đào tạo trong việc tuyên truyền, giáo dục, vận động xây dựng nông thôn mới huyện thanh thủy, tỉnh phú thọTrả hồ sơ điều tra bổ sung đối với các tội xâm phạm sở hữu có tính chất chiếm đoạt theo pháp luật Tố tụng hình sự Việt Nam từ thực tiễn thành phố Hồ Chí Minh (Luận văn thạc sĩ)Nghiên cứu khả năng đo năng lượng điện bằng hệ thu thập dữ liệu 16 kênh DEWE 5000Định tội danh từ thực tiễn huyện Cần Giuộc, tỉnh Long An (Luận văn thạc sĩ)Thiết kế và chế tạo mô hình biến tần (inverter) cho máy điều hòa không khíSở hữu ruộng đất và kinh tế nông nghiệp châu ôn (lạng sơn) nửa đầu thế kỷ XIXTổ chức và hoạt động của Phòng Tư pháp từ thực tiễn tỉnh Phú Thọ (Luận văn thạc sĩ)Giáo án Sinh học 11 bài 15: Tiêu hóa ở động vậtGiáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtGiáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtBÀI HOÀN CHỈNH TỔNG QUAN VỀ MẠNG XÃ HỘI