0
  1. Trang chủ >
  2. Kỹ Thuật - Công Nghệ >
  3. Hóa học - Dầu khí >

ASTM D6371 05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

Tài liệu Standard Test Method forPour Point of Petroleum Products1 ppt

Tài liệu Standard Test Method forPour Point of Petroleum Products1 ppt

... Temperature of Residual Fuel Oil4D 2500 Test Method for Cloud Point of Petroleum ProductsD 3245 Test Method for Pumpability of Industrial Fuel OilsD 5853 Test Method for Pour Point of Crude ... Designation: D 97 – 05Designation: 15/95An American National Standard Standard Test Method forPour Point of Petroleum Products1This standard is issued under the fixed designation D 97; the number ... the IP, this test method is under the jurisdiction of the StandardizationCommittee. This test method was adopted as a joint ASTM-IP Standard in 1965.2Statements defining this test and its significance...
  • 9
  • 597
  • 0
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

... in Tests of Hydraulic Cement C305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic ConsistencyC349 Test Method for Compressive Strength of Hydraulic- Cement Mortars ... ASTM Standards:3C91 Specification for Masonry Cement C114 Test Methods for Chemical Analysis of Hydraulic Cement C150 Specification for Portland Cement C230/C230M Specification for Flow Table for ... `,`,```,```,,``,,``,,``,```,,`-`-`,,`,,`,`,,` Designation: C109/C109M – 11a Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) 1This standard is issued under the fixed designation...
  • 10
  • 851
  • 0
ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

ASTM D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

... Designation: D5453 − 12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence 1This standard ... approved in 2009 as D5453 09. DOI:10.1520 /D5453- 12.2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards ... 3—Materials meeting the requirements in 6.8 provide a moreuniform injection of the sample into the boat by wicking any remainingdrops of the sample from the tip of the syringe needle prior to introductionof...
  • 11
  • 1,682
  • 2
ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

ASTM D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

... REGISTERWASHINGTON, D.C.Document Name: CFR Section(s): Standards Body: e ASTM D129: Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) 40 CFR 60.106(j)(2)American Society for ... considered legally binding upon all citizens and residents of the United States of America. HEED THIS NOTICE: Criminal penalties may apply for noncompliance. Official Incorporator:THE EXECUTIVE ... AMERICALegally Binding DocumentBy the Authority Vested By Part 5 of the United States Code § 552(a) and Part 1 of the Code of Regulations § 51 the attached document has been duly INCORPORATED...
  • 6
  • 406
  • 4
ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

... Point of Petroleum Products (Automatic Pressure Pulsing Method) D5950 Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) D5985 Test Method for Pour Point of Petroleum Products (Rotational ... Designation: D86 − 12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure 1This standard is issued under the fixed designation D86; the number immediately following ... Practice for Automatic Sampling of Petroleum and Petroleum Products D4953 Test Method for Vapor Pressure of Gasoline andGasoline-Oxygenate Blends (Dry Method) D5190 Test Method for Vapor Pressure of...
  • 28
  • 894
  • 1
ASTM D93 Standard Test Methods for Flash Point by PenskyMartens Closed Cup Tester

ASTM D93 Standard Test Methods for Flash Point by PenskyMartens Closed Cup Tester

... Documents2.1 ASTM Standards:2D56 Test Method for Flash Point by Tag Closed Cup Tester D3941 Test Method for Flash Point by the EquilibriumMethod With a Closed- Cup ApparatusD4057 Practice for Manual ... Designation: D93 − 13Designation: 34/99 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester 1This standard is issued under the fixed designation D93; the number immediately ... the test cup, test cover and shutter,2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards...
  • 18
  • 694
  • 1
ASTM D482 Standard Test Method for Ash from Petroleum Products

ASTM D482 Standard Test Method for Ash from Petroleum Products

... Designation: D482 − 13Designation: 4/96 Standard Test Method for Ash from Petroleum Products 1This standard is issued under the fixed designation D482; the number immediately ... Test Method for Sulfated Ash from Lubricating Oilsand AdditivesD4057 Practice for Manual Sampling of Petroleum and Petroleum Products D4177 Practice for Automatic Sampling of Petroleum and Petroleum ... referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards volume information, refer to the standard s...
  • 4
  • 1,008
  • 2
ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

... Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD189 Test Method for Conradson Carbon Residue of Petro-leum Products D482 Test Method for Ash ... Designation: D524 − 10Designation: 14/94 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products 1This standard is issued under the fixed designation D524; the number immediately ... notapply to all materials which can be tested because the carbon residue test is applicable to a wide variety of petroleum products. The Ramsbottom Carbon Residue test method is limited to those samples...
  • 9
  • 1,419
  • 3
ASTM D976  06 Standard Test Method for Calculated Cetane Index of Distillate Fuels

ASTM D976 06 Standard Test Method for Calculated Cetane Index of Distillate Fuels

... Theequation for Calculated Cetane Index in Test Method D976 80and in this version (D976 06) of the test method are the same.4. Equation for Calculated Cetane Index 4.1 The Calculated Cetane Index ... result of a larger degree of offset between Test Method D976 Cetane Index and the results of Test Method D613 over theentire range of the correlation. Generally, it has been found thatuse of Test ... Designation: D976 06 (Reapproved 2011) Standard Test Method for Calculated Cetane Index of Distillate Fuels 1This standard is issued under the fixed designation D976; the number immediately...
  • 3
  • 1,574
  • 3
ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

ASTM D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

... Designation: D1319 − 13 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption 1This standard is issued under the fixed designation D1319; the ... Documents2.1 ASTM Standards:2D86 Test Method for Distillation of Petroleum Products atAtmospheric PressureD1655 Specification for Aviation Turbine FuelsD2710 Test Method for Bromine Index of Petroleum ... probability):7Supporting data regarding the precision obtained from a round robin test for oxygenate containing samples in Table 3 have been filed at ASTM InternationalHeadquarters and may be obtained by requesting...
  • 7
  • 1,903
  • 2
ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

ASTM D2887 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

... Designation: D2887 − 13Designation: 406 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography 1,2This standard is issued under the fixed designation D2887; ... D2887 for deter-mining the boiling range distribution of petroleum fractions by gas chromatography has no bias because the boiling range distribution can only be defined in terms of a test method. 14.2.1 ... Distillation of Petroleum Products atReduced PressureD2892 Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)D3710 Test Method for Boiling Range Distribution of Gaso-line...
  • 24
  • 892
  • 3
ASTM D4539  10  Standard Test Method for Filterability of Diesel Fuels by LowTemperature Flow Test (LTFT)

ASTM D4539 10 Standard Test Method for Filterability of Diesel Fuels by LowTemperature Flow Test (LTFT)

... Designation: D4539 10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT) 1This standard is issued under the fixed designation D4539; the number ... Point of Petroleum ProductsD975 Specification for Diesel Fuel OilsD1655 Specification for Aviation Turbine Fuels D2500 Test Method for Cloud Point of Petroleum ProductsD3117 Test Method for Wax ... referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards volume information, refer to the standard s...
  • 6
  • 640
  • 2
ASTM D6079  11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the HighFrequency Reciprocating Rig (HFRR)

ASTM D6079 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the HighFrequency Reciprocating Rig (HFRR)

... Designation: D6079 11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) 1This standard is issued under the fixed designation D6079; the number ... since the last revision or reapproval.1. Scope*1.1 This test method covers the evaluation of the lubricity of diesel fuels using a high-frequency reciprocating rig (HFRR). 1.2 This test method ... Practice for Aviation Fuel Sample Containers for Tests Affected by Trace ContaminationD6078 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity...
  • 8
  • 1,134
  • 2
ASTM D6371  05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

ASTM D6371 05 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

... Designation: D6371 05 (Reapproved 2010) Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels 1This standard is issued under the fixed designation D6371; the number ... 2 005 as D6371 05. DOI:10.1520 /D6371- 05R10.2 For referenced ASTM standards, visit the ASTM website, www .astm. org, orcontact ASTM Customer Service at service @astm. org. For Annual Book of ASTM Standards ... 116 Diesel and domestic heating fuels - Determination of cold filter plugging point 3. Terminology3.1 Definitions of Terms Specific to This Standard: 1This test method is under the jurisdiction of...
  • 8
  • 746
  • 2
provisional standard test method for water-soluble chloride available for corrosion of embedded steel in mortar a

provisional standard test method for water-soluble chloride available for corrosion of embedded steel in mortar a

... TEST METHOD FOR WATER-SOLUBLE CHLORIDE 222.1-1ACI 222.1-96 Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Mortar and Concrete Using ... determination of water-soluble chloride in a cementsystem.* However, some aggregates contain a considerableamount of chloride that is bound in the aggregate and is not available for the corrosion ... STANDARD 1—Scope1.1—This test method provides procedures for the sam-pling and analysis of hydraulic-cement mortar, concrete, oraggregate for chloride that is water-soluble and available for the corrosion reaction...
  • 3
  • 344
  • 0

Xem thêm

Từ khóa: ngv containers using proposed astm standard test method for examination of gas filled filament wound pressure vessels using acoustic emission astm e070403 95 1standard addition method for the detection of the wnv particle in spiked blood serumthe fifo method is also acceptable and can be used if the company considers this more appropriate for management purposes the company shall use the same allocation method for all inventories having a similar nature and use1 fridrich j a new steganographic method for palette based images proc of the is amp t pics conference april 1998 savannah georgia 1998 285289account for the difference in behavior of ideal and real gasesd provide an estimate of the doe return on investment or net present value for this project this estimate should incorporate the profit before taxes positive cash flow for the first 10 years of commercialization and treat the doe sbir or sttr fua mcconn m m 2007b genetic evidence for differences in the pathways of druse and prismatic calcium oxalat crystal formation in medicago truncatulatest—a new method for testing rock propertiesnonspecific nested suppression pcr method for isolation of unknown flanking dna cold start method1—film properties of polymethacrylates and polyacrylates using test method astm d 412 lavelle 1988standard test taking tools for standardized teststhe standard chemotherapy for epithelial ovarian cancer eoc patients is currently a combination of taxane and platinum howevermethod for determination of resistancesample test question for cseta method for effectiveNghiên cứu sự biến đổi một số cytokin ở bệnh nhân xơ cứng bì hệ thốngNghiên cứu sự hình thành lớp bảo vệ và khả năng chống ăn mòn của thép bền thời tiết trong điều kiện khí hậu nhiệt đới việt namNghiên cứu tổ chức pha chế, đánh giá chất lượng thuốc tiêm truyền trong điều kiện dã ngoạiMột số giải pháp nâng cao chất lượng streaming thích ứng video trên nền giao thức HTTPBiện pháp quản lý hoạt động dạy hát xoan trong trường trung học cơ sở huyện lâm thao, phú thọGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitGiáo án Sinh học 11 bài 13: Thực hành phát hiện diệp lục và carôtenôitNGHIÊN CỨU CÔNG NGHỆ KẾT NỐI VÔ TUYẾN CỰ LY XA, CÔNG SUẤT THẤP LPWAN SLIDENghiên cứu tổng hợp các oxit hỗn hợp kích thƣớc nanomet ce 0 75 zr0 25o2 , ce 0 5 zr0 5o2 và khảo sát hoạt tính quang xúc tác của chúngNghiên cứu khả năng đo năng lượng điện bằng hệ thu thập dữ liệu 16 kênh DEWE 5000Định tội danh từ thực tiễn huyện Cần Giuộc, tỉnh Long An (Luận văn thạc sĩ)Tìm hiểu công cụ đánh giá hệ thống đảm bảo an toàn hệ thống thông tinThơ nôm tứ tuyệt trào phúng hồ xuân hươngThiết kế và chế tạo mô hình biến tần (inverter) cho máy điều hòa không khíTăng trưởng tín dụng hộ sản xuất nông nghiệp tại Ngân hàng Nông nghiệp và Phát triển nông thôn Việt Nam chi nhánh tỉnh Bắc Giang (Luận văn thạc sĩ)Giáo án Sinh học 11 bài 15: Tiêu hóa ở động vậtchuong 1 tong quan quan tri rui roGiáo án Sinh học 11 bài 14: Thực hành phát hiện hô hấp ở thực vậtChiến lược marketing tại ngân hàng Agribank chi nhánh Sài Gòn từ 2013-2015MÔN TRUYỀN THÔNG MARKETING TÍCH HỢP