... Systems, Inc.
Lab 2.3.5 Configuring OSPF Timers
Objective
• Setup an IP addressing scheme for OSPF area.
• Configure and verify OSPF routing.
• Modify OSPF interface timers to adjust ...
Step 5 Configure OSPF routing on both routers
a. Configure OSPF routing on each router. Use OSPF process number 1 and ensure all networks
are in area 0. Refer to the lab, Confi...
...
Lab 2.3.5 Configuring OSPF Timers
Objective
• Setup an IP addressing scheme for OSPF area.
• Configure and verify OSPF routing.
• Modify OSPF interface timers to adjust ...
Step 5 Configure OSPF routing for both routers
a. Configure OSPF routing on each router. Use OSPF process number 1 and ensure all networks
are in area 0. Refer to the lab, Configuring Loopback...
... Configure OSPF routing on router London
a. Configure an OSPF routing process on the router London. Use OSPF process number 1 and
ensure all networks are in area 0.
London(config)#router ospf ... Configure OSPF routing on router Ottawa
a. Configure an OSPF routing process on the router Ottawa. Use OSPF process number 1 and
ensure all networks are in area 0.
Ottawa(confi...
...
Lab 2.3.4 Configuring OSPF Authentication
Objective
• Setup an IP addressing scheme for Open Shortest Path First (OSPF) area.
• Configure and verify OSPF routing.
• Introduce OSPF authentication ...
Step 5 Configure OSPF routing on both routers
a. Configure OSPF routing on each router. Use OSPF process number 1 and ensure all networks
are in area 0. Refer to the lab,...
...
Lab 2.3.4 Configuring OSPF Authentication
Objective
• Setup an IP addressing scheme for Open Shortest Path First (OSPF) area.
• Configure and verify OSPF routing.
• Introduce OSPF authentication ...
Step 5 Configure OSPF routing on both routers
a. Configure OSPF routing on each router. Use OSPF process number 1 and ensure all networks
are in area 0. Refer to the lab,...
... ip ospf events.
SanJose1#debug ip ospf events
OSPF events debugging is on
SanJose1#
00:08:25: OSPF: Rcv hello from 192.168.31.22 area 0 from
FastEthernet0/0 192.168.1.2
00:08:25: OSPF: ...
event-driven. Next, use the show ip ospf command to get more details about the OSPF
process, including the router ID:
SanJose1#show ip ospf
Routing Process " ;ospf 1" w...
...
Singapore(config)#router ospf 1
Singapore(config-router)#area 51 virtual- link 192.168.1.3
Note: You must specify SanJose3 by its router ID.
In order for the virtual link to function, you ... 192.168.248.1 /24
Objective
In this lab, you configure an OSPF virtual link so that a disconnected area can reach the
backbone, as required by OSPF.
Scenario
At midnight...
...
Singapore(config)#router ospf 1
Singapore(config-router)#area 51 virtual- link 192.168.1.3
Note: You must specify SanJose3 by its router ID.
In order for the virtual link to function, you ... 192.168.248.1 /24
Objective
In this lab, you configure an OSPF virtual link so that a disconnected area can reach the
backbone, as required by OSPF.
Scenario
At midnight...